Somerset · England

Bath Resealing for Beercrocombe homes

Bath resealing for Beercrocombe, without a refit. Get a fixed quote from your photos, then we come to you.

  • Black mould in the sealant
  • Damp near the bath
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Beercrocombe homes

About our bath resealing in Beercrocombe

A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. We regularly repair basins & vanity units, baths and shower trays & enclosures, and people most often call us about silicone smeared on tiles and mould you can’t clean out.

The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.

Roll-top bath being refinished by a Surface Doctor technician
Where
Beercrocombe (TA3)
County
Somerset
Guarantee
A year, on every repair
Price
Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

Our work in Beercrocombe

Beercrocombe is about 6 miles east of Taunton, in Somerset. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 640 towns and villages across Somerset, from the larger towns to small villages.

Postcode districts we cover here: TA3. Jobs here include addresses on Beer Street and Broadmead Road. Nearby, we also work in Curry Mallet (1 mile north-east), Hatch Beauchamp (1 mile west), Stewley (1 mile south), Hatch Green (2 miles south-west) and Isle Abbotts (2 miles east). Within a short drive, we also cover Taunton (6 miles west), Bridgwater (10 miles north), Yeovil (14 miles east), Chard (7 miles south), Wellington (11 miles west) and Street (14 miles north-east).

Local landmarks in Beercrocombe

Typical jobs here are in homes near Church of St James, The Bell Inn and Curry Mallet Church of England Primary School and the streets around them. Not far away are Swell Wood RSPB Nature Reserve.

Map of Beercrocombe © OpenStreetMap contributors

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What we do, step by step

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take around two hours, and you are welcome to carry on with your day while we work.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Let the surface dry out before the visit
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Related advice

What affects the price in Beercrocombe

We give every job a fixed quote from photos. These are the things that affect it:

  • Previous DIY repairs that have to come out
  • Access to the area
  • Unusual colours or finishes
  • The material

A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.

Quotes from your photos

You can take the pictures on your phone. Just make sure we can see:

  • A wider photo showing the entire bath or shower
  • Where you are, by postcode
  • Details of any past repairs
  • Natural light rather than flash

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say right away whether it can be repaired.

What we’re called out for in Beercrocombe

Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.

If you can see any of these, send us a photo:

  • Leaks at the edges
  • Black mould in the sealant
  • A messy previous reseal
  • Gaps in the seal

Questions to ask before you book

  • How to look after the finish
  • How long the guarantee is and what it covers
  • How the colour is matched
  • Who will actually do the work

Choosing a repair company

What your bath or shower is made of matters

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Common questions in Beercrocombe

Why does the silicone keep cracking?

The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.

What areas do you cover?

The entire UK, including all of Somerset. Send your postcode with your pictures and we’ll confirm dates.

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Are there extra charges for Beercrocombe?

We don’t add a call-out fee. Your fixed price includes everything.

How long before I can shower?

We will give you the curing time.

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Landlord and trade work in Beercrocombe

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.

We carry out planned and one-off repairs for housing associations and facilities teams in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Store bottles on a shelf
  • Use the extractor fan
  • Reseal when black spots will not clean off
  • Air the room after use

Leave the sealant to cure for the time we give you, usually around 24 hours.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.

Resealing in Beercrocombe: why it matters

Putting new silicone over old does not last. It soon peels, and mould stays trapped behind it. We remove the old sealant completely. We charge the same wherever you are, so there’s no premium for Beercrocombe. The job itself decides the price: how much damage, what it’s made of and how many items.

Why Beercrocombe customers choose us

  • We leave the room as we found it
  • One visit for most repairs
  • No extra charge for your area
  • Honest advice, even when it means no job

See our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.