Somerset · England

Bath Resealing in Curry Mallet

Bath resealing for Curry Mallet, without a refit. Get a fixed price from your pictures, then book a visit.

  • A messy previous reseal
  • Leaks at the edges
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Curry Mallet homes

Bath resealing at your home in Curry Mallet

A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they protect the walls and floor. If you are dealing with sealant that’s split or lifting and gaps by the taps, we can help, whatever the material.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.

Roll-top bath being refinished by a Surface Doctor technician
Area
Curry Mallet (TA3)
Region
Somerset
Guarantee
One year on every repair
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

Different materials, different repairs

Baths

Baths are resealed with water in them, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Why reseal now?

Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. We remove the old sealant completely. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • Most jobs done in one visit
  • We come to you, anywhere in the UK
  • Every repair guaranteed for a year
  • Everything repaired in place

Take a look at our pricing.

When to call us in Curry Mallet

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.

Common reasons people in Curry Mallet contact us are:

  • Black mould in the sealant
  • Gaps in the seal
  • Water getting behind the bath or tray
  • An untidy old seal

What to look for in a quote

  • How long the guarantee is and what it covers
  • Whether the price covers travel
  • How soon you can use it again
  • Whether they match the colour on site

Our hiring checklist

Aftercare tips

Simple care helps the repair last. We recommend:

  • Clean the sealant gently and regularly
  • Replace the seal when mould sets in
  • Store bottles on a shelf
  • Run the extractor fan during and after showers

Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.

Black mould in sealant isn’t just unsightly, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.

The process

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes about two hours for a bath. Before we leave, we explain how soon it can be used and how to care for it.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Before we arrive

  • Have somewhere for us to park nearby if possible
  • Let us know if it has been repaired before
  • Tell us if there are stairs or a lift

How to get a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a free quote

Read more

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

Our work in Curry Mallet

Curry Mallet is about 6 miles east of Taunton, in Somerset. Whether you’re in the middle of Curry Mallet or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Curry Mallet is one of 640 towns and villages in Somerset we cover.

Every address in TA3 is covered, from the main roads to the quietest streets. That includes homes on Headwell Hill, Silver Street and Higher Street. We also travel to Beercrocombe (1 mile south-west), Hatch Beauchamp (2 miles south-west), Isle Abbotts (2 miles east), Stewley (2 miles south) and Hatch Green (2 miles south-west). We also work in nearby towns such as Taunton (6 miles west), Bridgwater (10 miles north), Yeovil (14 miles east), Chard (8 miles south), Wellington (12 miles west) and Street (13 miles north-east).

Near you in Curry Mallet

Typical jobs here are in homes near Curry Mallet Church of England Primary School, The Bell Inn and Church of St James. Well-known places in the area include Willows and Wetlands Visitor Centre (3.9 miles north). Green spaces nearby include Swell Wood RSPB Nature Reserve.

Map of Curry Mallet © OpenStreetMap contributors

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Somerset and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Curry Mallet questions

Will the price change on the day?

The price is fixed for what the pictures show. If there’s more, we will tell you before starting.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Do you seal over the old sealant?

No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

How long does silicone take to cure?

You will get the curing time from us.

What information do you need?

Photos of the damage, a photo of the whole bath or shower and your postcode. After that, we just agree a date.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

How do I get a price for bath resealing in Curry Mallet?

Because every job differs, we price from photos. You know the full cost before anything is booked.

When a repair is not the answer

We will always be straight with you, so here’s what a repair can’t fix:

  • Water damage behind the bath that needs a builder
  • Loose tiles, which need refixing first
  • Very wide gaps that need a trim

Send us photos and we will tell you honestly before booking.

Surfaces we repair

  • Kitchen worktops & sinks
  • Wet rooms
  • Baths
  • Basins & vanity units
  • Shower trays & enclosures
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.