Herefordshire · England

Bath & shower resealing (mastic) in Berrow, Herefordshire

Bath resealing in Berrow without the cost of replacing. Send us photos for a fixed quote, then book a visit.

  • Mould you cannot clean out
  • Missing sealant behind the taps
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Berrow homes

FAQs for Berrow

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help.

How much does bath resealing cost in Berrow?

We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can you quote from pictures?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

Why does my sealant keep splitting?

Something is moving. If it keeps happening, the support may need fixing.

Why does mould come back so fast?

Mould needs moisture. Ventilation and drying keep it clean longer.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Do you seal over the old sealant?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

About our bath resealing in Berrow

Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Typical jobs include gaps in the seal and a messy previous reseal, in wet rooms, baths and basins & vanity units.

You get a one-year guarantee, the same in Berrow as everywhere else we work.

Roll-top bath being refinished by a Surface Doctor technician
Area
Berrow (WR13, GL19)
Region
Herefordshire
Cover
A year, on every repair
Price
Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

When to call us in Berrow

Poor ventilation speeds things up: damp hangs around, and mould grows faster.

The most common problems we are called about are:

  • Damp near the bath
  • Silicone smeared on tiles
  • Discoloured, yellow sealant
  • Missing sealant behind the taps

What your quote should include

  • What protection goes down before work starts
  • What the guarantee covers, and for how long
  • Aftercare advice
  • What happens if the damage is worse than the photos show

Choosing a repair company

How we price bath resealing

We charge the same across the UK, including Berrow. The price reflects:

  • What kind of damage it is
  • Access to the area
  • Any earlier repairs that need removing first
  • The material

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

How to get a fixed quote

It only takes a minute to photograph the damage. Please include:

  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare
  • A photo taken from further back
  • Your postcode, so we can check dates

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Where we work around Berrow

Berrow is about 6 miles east of Ledbury, in Herefordshire. We visit customers in Berrow, so there is no workshop to go to. Berrow is one of 255 towns and villages in Herefordshire where we work. Our jobs stretch from Berrow to Birmingham (36 miles away).

Here we cover the WR13 and GL19 postcode area. Other places close to Berrow include White End (1 mile west), Birts Street (1 mile north), Castlemorton (2 miles north), Bromesberrow (3 miles west) and Drugger's End (3 miles north). Within a short drive, we also cover Ross-on-Wye (14 miles south-west), Ledbury (6 miles west), Merrivale (14 miles south-west), Bromyard (15 miles north-west), Colwall Stone (6 miles north-west) and Leigh Sinton (10 miles north).

Landmarks near Berrow

Typical jobs here are in homes near Church of St Faith and Pendock CofE Primary School. A little further out are Bronsil Castle (3.3 miles north-west). Green spaces nearby include Hollybed Farm Meadows and Raggedstone Hill.

Map of Berrow © OpenStreetMap contributors

The process

Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes around two hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Let us know if it has been repaired before
  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area

Get a quote

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.

Get a free quote

Advice

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

For landlords and businesses

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.

Different materials, different repairs

Baths

Baths are resealed with water in them, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Looking after it afterwards

Looking after the surface is easy:

  • Clean the joints with a mild cleaner
  • Dry the seal after bathing
  • Reseal when black spots will not clean off
  • Keep bottles off the joints

Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.

Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

Resealing in Berrow: why it matters

Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. We remove the old sealant completely. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Berrow clients choose us

  • Usually one visit, start to finish
  • A fixed quote before booking
  • Every repair guaranteed for a year
  • We leave the room as we found it

Take a look at our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.