Kent · England

Bath Resealing in Bishopsbourne

Bath, shower and sink resealing with new mould-resistant silicone in Bishopsbourne, carried out at your home and guaranteed for a year.

  • Silicone smeared on tiles
  • Discoloured, yellow sealant
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Bishopsbourne homes

Resealing in Bishopsbourne: why it matters

Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. The price reflects the work involved, not where you live. The full price is agreed before you book.

Why us?

  • Free fixed quotes from pictures
  • We will tell you if it’s not worth repairing
  • Most jobs done in one visit
  • Dust sheets down, tidy finish

See our pricing.

Bath resealing at your home in Bishopsbourne

Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, as one neat, continuous bead. We’re frequently asked to fix silicone smeared on tiles and leaks at the edges, in baths, wet rooms and kitchen worktops & sinks.

Big or small, you get the same one-year guarantee.

Location
Bishopsbourne (CT4)
County
Kent
Guarantee
12 months on all our work
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Clean the sealant gently and regularly
  • Reseal when black spots won’t clean off
  • Air the room after use
  • Use the extractor fan

Let it cure fully before using the bath or shower, typically around 24 hours.

Damp below or loose tiles need checking quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

When a repair isn’t the answer

Before booking, it’s worth knowing the limits:

  • Hollow or loose tiles
  • Very wide gaps that need a trim
  • A bath or tray that moves, until its support is fixed

Not sure? Send pictures and we’ll give you a straight answer before you book.

What we work on

  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Basins & vanity units
  • Shower trays & enclosures

Bishopsbourne questions

What happens once I’ve sent photos?

You’ll get a fixed quote back. There’s no obligation to book.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can you repair something that’s been repaired before?

Yes, we often do. It can add a little time, which we include in the quote.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Kent.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you price it without visiting?

Nearly always. If photos don’t show enough, we’ll ask for another angle.

Why does my sealant keep going mouldy?

Mould needs moisture. Ventilation and drying keep it clean longer.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Where we work around Bishopsbourne

Bishopsbourne is about 4 miles south-east of Canterbury, in Kent. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in 922 places in Kent, from the larger towns to small villages. Our nearest city page is London, about 56 miles away.

Postcode districts we cover here: CT4. From The Street, Park Lane and Crows Camp Road or anywhere nearby, we can come to you. If you are just outside Bishopsbourne, we cover Kingston (1 mile south-east), Bridge (1 mile north), Out Elmstead (1 mile south-east), Marley (1 mile south) and Patrixbourne (2 miles north). Larger places within reach include Ashford (13 miles south-west), Canterbury (4 miles north-west), Margate (15 miles north-east), Dover (10 miles south-east), Folkestone (10 miles south) and Ramsgate (14 miles north-east).

Local landmarks in Bishopsbourne

We visit homes around The Mermaid Inn and Church of St Mary and the streets around them. Bishopsbourne’s nearest station is Bekesbourne station, about 2.2 miles north of the centre. Well-known places in the area include Canterbury Castle (4.1 miles north-west) and Kent and Canterbury Hospital (3.2 miles north-west).

Map of Bishopsbourne © OpenStreetMap contributors

Can I fix it myself?

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What your bath or shower is made of matters

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

What we do, step by step

We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take about two hours for a bath, and we will keep you posted as we go.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. We ensure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Let us know about parking or access
  • Let us know which floor the room is on

Ask for a price

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Send photos for a quote

Related advice

What affects the price in Bishopsbourne

Every quote is fixed and free. What we take into account:

  • The size and number of damaged areas
  • The type of damage
  • How many items we do on one visit
  • How easy the damage is to reach

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what helps:

  • A wider photo showing the whole bath or shower
  • Where you are, by postcode
  • What it’s made of, if you know
  • A close-up of the damage, in focus

The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

What we are called out for in Bishopsbourne

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.

It’s worth getting a quote if you see:

  • Old sealant that looks dirty
  • Missing sealant behind the taps
  • Black mould in the sealant
  • Damp near the bath

What to look for in a quote

  • Whether the price is fixed and includes VAT
  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • What happens if the damage is worse than the pictures show

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.