Kent · England
Bath & shower resealing (mastic) in Bridge, Kent
Bath resealing for Bridge, without a refit. Get a fixed price from your photos, then we come to you.
- A messy previous reseal
- Mould you cannot clean out
- Old sealant that looks dirty
Bath resealing at your home in Bridge
We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. Most jobs take a couple of hours. Whether it’s leaks at the edges and black mould in the sealant, we can help.
You get a one-year guarantee, the same in Bridge as everywhere else we work.
- Area
- Bridge (CT4)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Resealing in Bridge: why it matters
A reseal is one of the cheapest bathroom jobs there is. Leaving failed sealant can let water cause damage that costs far more to fix. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why book with us
- Fixed prices from your pictures
- A year’s guarantee on all work
- Straight answers about what a repair can do
- Generally one visit, start to finish
See our prices page.
Towns and villages near Bridge
Other services in Bridge
When to call us in Bridge
In time, even good sealant discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.
Send us a photo if you notice any of these:
- Black mould in the sealant
- Water getting behind the bath or tray
- Old sealant that looks dirty
- Silicone coming away from the tiles
What to look for in a quote
- How long it needs to cure
- Whether the colour is mixed to match
- A fixed price, and whether VAT is included
- What happens if they find more damage
How to look after the repair
After the repair has cured, a few habits help it last:
- Open a window after bathing
- Clean the sealant gently and regularly
- Reseal when black spots will not clean off
- Wipe the joints dry after use
Good ventilation is the best protection, and dry the joints after bathing so mould struggles to take hold.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.
What affects the price in Bridge
A fixed quote means you know the cost before booking. We take into account:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- The size and number of damaged areas
- The material
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
We price nearly every job from photos. This is what to send:
- Details of any past repairs
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath or shower
- A close-up of the damage, in focus
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
For landlords and businesses
We work for landlords, letting agents and housing providers in Bridge as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
When we’d advise against a repair
A repair is not always the answer, and we’d rather say so up front. Repairs will not solve:
- Gaps too big for silicone alone
- Loose tiles, which need refixing first
- Movement in the bath or tray
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Wet rooms
How the visit works
We work cleanly and quietly. We protect the area first, then the job itself takes a couple of hours. At the end we talk you through how soon it can be used and how to care for it.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Getting ready for the visit
- Clear the area around the damage
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
Bridge: your questions answered
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can you reseal over the old silicone?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Why does the silicone keep cracking?
Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Where we work around Bridge
Bridge is about 3 miles south-east of Canterbury, in Kent. Clients in Bridge get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. We cover all 922 towns and villages in Kent. Our nearest city page is London, about 55 miles away.
We cover every part of CT4 and the streets around it. Whether you live on High Street, Station Road and Western Avenue or anywhere nearby, we can come to you. Other places close to Bridge include Patrixbourne (1 mile north-east), Bishopsbourne (1 mile south), Bekesbourne Hill (1 mile north-east), Bekesbourne (1 mile north-east) and Kingston (2 miles south-east). We also work in nearby towns such as Ashford (13 miles south-west), Canterbury (3 miles north-west), Margate (15 miles north-east), Dover (11 miles south-east), Folkestone (11 miles south) and Ramsgate (14 miles north-east).
What’s near Bridge
Locally, our jobs take us to homes close to The Bridge Arms, St. Anselm's Catholic School and Church of St Peter, among other places. Bridge’s nearest station is Bekesbourne station, roughly 1.2 miles north-east of the centre. Other landmarks nearby include Canterbury Roman Museum (2.9 miles north-west) and Kent and Canterbury Hospital (2.1 miles north-west). For a walk, there is Blean Woods RSPB Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
