Hampshire · England
Bath & shower resealing (mastic) in Blackwater, Hampshire
Bath resealing in Blackwater without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- An untidy old seal
- Discoloured, yellow sealant
- Sealant that is split or lifting
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Bath resealing at your home in Blackwater
Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Our technicians work on baths, kitchen worktops & sinks and basins & vanity units, and people most often call us about black spots in the silicone and discoloured, yellow sealant.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Location
- Blackwater (GU17)
- Area hub
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Blackwater
Sealant does not last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.
It’s worth getting a quote if you see:
- Leaks at the edges
- Old sealant that looks dirty
- Silicone coming away from the tiles
- An untidy old seal
What to look for in a quote
- Whether they match the colour on site
- How the room is protected while they work
- Who turns up on the day
- What aftercare is recommended
Resealing in Blackwater: why it matters
Putting new silicone over old doesn’t last. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Nothing taken out or refitted
Read our pricing.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
How to care for the repair
To keep it looking its best:
- Clean the joints with a mild cleaner
- Open a window after bathing
- Reseal at the first sign of lifting
- Store bottles on a shelf
Good ventilation is the best protection, and dry the joints after bathing so mould struggles to take hold.
Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.
What else we do in Blackwater
Blackwater and the surrounding area
Blackwater is about 1 mile south of Sandhurst, in Hampshire. Our repair technicians come to customers in Blackwater and nearby villages, so nothing has to leave your home. We cover 683 places across Hampshire, from the larger towns to small villages. We work right across the region, from Blackwater to London (32 miles away).
Here we cover the GU17 postcode area. Local streets include London Road, Bell Lane and Ash Close, all of which we cover. Nearby, we also work in Frogmore (1 mile west), Hawley (1 mile south-east), College Town (1 mile north-east), Sandhurst (1 mile north) and York Town (1 mile east). Larger places within reach include Basingstoke (14 miles west), Farnborough (3 miles south), Fleet (5 miles south-west), Aldershot (6 miles south), Alton (15 miles south-west) and Tadley (15 miles west).
Landmarks near Blackwater
Locally, our jobs take us to homes close to Royal Military Academy Library, Sandhurst Memorial Park and Frogmore Community College, among other places. Nearby too are Mr Bumble pub (0.6 miles south-east), Frogmore Infant School (within half a mile south-west) and St Barnabas Church (less than half a mile west). The nearest railway station is Blackwater station, about 0.6 miles east of the centre. Other landmarks nearby include Frimley Park Hospital (2.4 miles south-east) and Staff College Museum (1.9 miles east). For a walk, there is Horseshoe Lake and Ball Hill.
What happens on the day
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to around two hours.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
Preparing for the visit
- Ensure the room can be ventilated
- Clear the area around the damage
- Tell us about parking, stairs or access
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
Prices and what affects them
A fixed quote means you know the cost before booking. We look at:
- The type of damage
- The size and number of damaged areas
- Access to the area
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- A clear, close picture of the problem area
- One picture of the entire bath or shower
- What it’s made of, if you know
- Whether it’s been repaired or coated before
Upload photos of the damage and a wider shot of the entire item, with your GU17 postcode, and we will come back with a fixed quote.
Different materials, different repairs
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Common questions in Blackwater
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Why does my sealant keep going mouldy?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Is there any odour?
Expect a mild smell while we are working.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
About our accreditations · Every repair comes with a one-year guarantee.
