West Sussex · England
Bath Resealing for Bolney homes
Bath resealing in and around Bolney: photo quotes, tidy work and a year’s guarantee.
- Water getting behind the bath or tray
- Unsealed corners
- Silicone coming away from the tiles
Resealing in Bolney: why it matters
A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. Our prices are the same across the UK, with no extra for Bolney. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- We come to you, anywhere in the UK
- Usually one visit, start to finish
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
Take a look at our prices page.
Bath resealing at your home in Bolney
Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours, then it needs to cure. We work on wet rooms, kitchen worktops & sinks and basins & vanity units, and the jobs we see most are water getting behind the bath or tray and mould you can’t clean out.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Location
- Bolney (RH17)
- Area hub
- West Sussex
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Signs you need bath resealing in Bolney
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.
Clients usually contact us about:
- Gaps in the seal
- Unsealed corners
- An untidy old seal
- Black mould in the sealant
Before you book anyone
- How the colour is matched
- Whether cleaning and preparation are in the price
- How to look after the finish
- What the guarantee covers, and for how long
How we price bath resealing
Quotes are free and the price is fixed. What we look at:
- Where the damage is and how we get to it
- Doing more than one item at once
- How hard the colour is to match
- The size and number of damaged areas
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Photographing the damage takes a minute. Please include:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- What it’s made of, if you know
- A close-up of the damage, in focus
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
For landlords and businesses
For anyone letting property in or around Bolney, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Towns and villages near Bolney
Other services in Bolney
Our work in Bolney
Bolney is about 4 miles north-west of Burgess Hill, in West Sussex. Our technicians come to customers in Bolney, so you don’t need to take anything anywhere. Bolney is one of 371 towns and villages in West Sussex where we work. Our jobs stretch from Bolney to London (about 35 miles away).
All of RH17 is within our area. Jobs here include addresses on The Street, Cherry Lane and Top Street. We also cover the places around Bolney: Crosspost (1 mile south-west), Twineham Green (2 miles south), Twineham (2 miles south), Wineham (3 miles south-west) and Kent Street (3 miles south-west). Further out, we also cover Crawley (8 miles north), Horsham (7 miles north-west), Worthing (15 miles south-west), Haywards Heath (5 miles east), Burgess Hill (4 miles south-east) and East Grinstead (12 miles north-east).
Around Bolney
In Bolney, that means homes near St Mary Magdalene's Church and Bolney CofE Primary School. The nearest railway station is Wivelsfield station, about 4.1 miles south-east. Well-known places in the area include The Dene Hospital (2.6 miles south-east) and Cuckfield Museum (2.6 miles east). Not far away are Blunts Wood and Paiges Meadow.
Questions from Bolney
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Why does my sealant keep going mouldy?
Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Do you cover Bolney?
We do. We send a technician to Bolney for every job, with no extra charge for travel.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
How long does resealing take?
Around two hours for a bath, then it needs to cure.
What your bath or shower is made of matters
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Baths
We fill the bath before sealing, so the joint is at its widest.
What happens on the day
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a couple of hours.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Open a window if you can
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Related advice
How to care for the repair
Simple care helps the repair last. Our advice:
- Give the seal a regular clean
- Ventilate the bathroom well
- Don’t stand toiletries on the seal
- Open a window after bathing
Do not scrape the sealant with anything sharp, and do not stand bottles on the seal.
Black mould in sealant is not just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.
About our accreditations · Every repair comes with a one-year guarantee.
