Stirling · Scotland
Bath Resealing for Boquhan homes
Bath, shower and sink resealing with new mould-resistant silicone in Boquhan, carried out at your home and guaranteed for a year.
- Discoloured, yellow sealant
- Leaks at the edges
- Sealant that is split or lifting
Bath resealing in Boquhan without replacing anything
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Whether it’s water getting behind the bath or tray and black mould in the sealant, we can help.
Every job is backed for twelve months in Boquhan and everywhere else. We return to put right any problem with the work.
- Location
- Boquhan (G63)
- County
- Stirling
- Cover
- 12 months on all our work
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Water damage behind the bath that needs a builder
- Gaps so wide they need filling or trims before sealing
- Movement in the bath or tray
If in doubt, send pictures and we will say what we think.
Materials we work on in Boquhan
- Basins & vanity units
- Wet rooms
- Baths
- Shower trays & enclosures
- Kitchen worktops & sinks
What affects the price in Boquhan
We give every job a fixed quote from photos. This is what makes a difference:
- Access to the area
- What kind of damage it is
- The material
- How many items we do on one visit
Our prices are the same across the UK, so there is no premium for Boquhan. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
You can take the pictures on your phone. Just ensure we can see:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, add your postcode and send them over. You will get a fixed quote, not an estimate.
Other services in Boquhan
Boquhan and nearby
Boquhan is about 10 miles north of Bearsden, in Stirling. We travel to customers in Boquhan and the surrounding area, so there’s no workshop to go to. Boquhan is one of 55 places in Stirling we cover. You can also see our page for Glasgow, about 14 miles away.
Our visits in G63 are booked in the same way as anywhere else. You’ll find Boquhan on the A875, so it’s easy for us to reach. We also travel to Balfron (1 mile north-east), Killearn (1 mile south-west), Croftamie (4 miles west), Drymen (4 miles west) and Buchlyvie (5 miles north-east). Within a short drive, we also cover Callander (14 miles north-east), Cambusbarron (15 miles east), Strathblane (5 miles south), Doune (15 miles north-east) and Kippen (8 miles north-east).
Near you in Boquhan
Our clients here include homes close to Balfron High School and the streets around them. A little further out are Killearn Hospital (2.4 miles south-west) and Ballikinrain (1.7 miles east). Green spaces nearby include Dumgoyne.
Repairs by material
Shower trays
We put weight on a tray before sealing it, for the same reason.
Baths
Baths are resealed with water in them, to open the joint fully.
Resealing in Boquhan: why it matters
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Why us?
- We leave the room as we found it
- Every repair guaranteed for a year
- No need to remove anything
- Usually one visit, start to finish
Take a look at our full price list.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take around two hours. We tidy up before we leave and let you know when you can use it again.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
Boquhan questions
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
When can I use the bath after resealing?
Normally about a day later. We’ll tell you the exact time.
Can you price it without visiting?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
What information do you need?
Photos of the damage, a picture of the entire bath or shower and your postcode. After that, we just agree a date.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
How do I stop mould in sealant?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Keep bottles off the joints
- Dry the seal after bathing
- Reseal when black spots will not clean off
- Air the room after use
Leave the sealant to cure for the time we give you, normally around 24 hours.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
What we’re called out for in Boquhan
In time, even good sealant discolours. Steam, soap and movement all wear it down.
Keep an eye out for these signs:
- Discoloured, yellow sealant
- An untidy old seal
- Sealant that’s split or lifting
- Damp near the bath
What to look for in a quote
- What happens if they find more damage
- Who will actually do the work
- Whether they match the colour on site
- What aftercare is recommended
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
