Redcar and Cleveland · England
Bath Resealing for Boulby homes
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Boulby and across Redcar and Cleveland. Send photos for a free, fixed quote.
- Old sealant that looks dirty
- Leaks at the edges
- Missing sealant behind the taps
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Bath resealing in Boulby, done in place
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, as one neat, continuous bead. We’re frequently asked to fix stained silicone and sealant that’s split or lifting, in baths, kitchen worktops & sinks and shower trays & enclosures.
All our work comes with our one-year guarantee.
- Area
- Boulby (TS13)
- Region
- Redcar and Cleveland
- Warranty
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Boulby
What else we do in Boulby
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Gaps so wide they need filling or trims before sealing
- A bath or tray that moves, until its support is fixed
- Rotten walls or floors behind the bath
Send us photos and we’ll tell you honestly.
Materials we work on in Boulby
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Baths
- Basins & vanity units
What bath resealing costs
We don’t charge extra for travel to Boulby. The price depends on:
- How many items we do on one visit
- The type of damage
- How hard the colour is to match
- How many areas need work
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Most quotes are done from photos alone. To make it quick:
- Something in shot to show the size
- Where you are, by postcode
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
If you are in Boulby and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Boulby and nearby
Boulby is about 8 miles east of Marske-by-the-Sea, in Redcar and Cleveland. Wherever you are in the TS13 postcode area, we come to you. Boulby is one of 48 places in Redcar and Cleveland where we work. Our nearest city page is Newcastle upon Tyne, about 44 miles away.
Jobs in TS13 work the same way as everywhere else we cover. We also travel to Easington (1 mile south-west), Cowbar (1 mile east), Staithes (1 mile east), Borrowby (2 miles south) and Port Mulgrave (2 miles south-east). Within a short drive, we also cover Redcar (10 miles west), Guisborough (10 miles west), Eston (13 miles west), Marske-by-the-Sea (8 miles west), Grangetown (13 miles west) and Skelton-in-Cleveland (6 miles west).
What’s near Boulby
Around Boulby, we work in homes near Church of All Saints and the streets around them. Further afield, we also cover the area around Kilton Castle (3.6 miles west) and Staithes Museum (1.4 miles east).
Do you need bath resealing in Boulby?
Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.
You may need us if you’ve spotted:
- An untidy old seal
- Discoloured, yellow sealant
- Gaps in the seal
- Mould you cannot clean out
What your quote should include
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- Whether they match the colour on site
How to care for the repair
Once the work has cured, treat it gently:
- Run the extractor fan during and after showers
- Do not stand toiletries on the seal
- Keep the joints dry
- Reseal when black spots won’t clean off
Leave the sealant to cure for the time we give you, normally about a day.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
Resealing in Boulby: why it matters
A reseal is one of the cheapest bathroom jobs there is, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Boulby clients choose us
- Usually one visit, start to finish
- CHAS and Constructionline accredited
- We leave the room as we found it
- We will tell you if it’s not worth repairing
See our prices page.
Your questions about bath resealing in Boulby
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Which areas do you work in?
We cover the entire UK, including Boulby and the rest of Redcar and Cleveland. Send your postcode with your pictures and we’ll offer you dates.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
How do I stop mould in sealant?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, to open the joint fully.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
The process
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. It normally takes about two hours for a bath, and we’ll tell you if anything changes.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Preparing for the visit
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
