Somerset · England
Bath & shower resealing (mastic) in Brean, Somerset
We travel to Brean for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- A messy previous reseal
- Unsealed corners
- Damp near the bath
How we handle bath resealing in Brean
Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. Most jobs take a couple of hours, plus curing time. We work on basins & vanity units, kitchen worktops & sinks and baths, and common reasons people get in touch are old sealant that looks dirty and unsealed corners.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Brean (TA8)
- Region
- Somerset
- Warranty
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What bath resealing costs
Every quote is fixed and free. What we take into account:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- Access to the area
- The material
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Your postcode, so we can check dates
Email us pictures of the damage and a wider shot of the whole item, with your TA8 postcode, and we’ll come back with a fixed quote.
Questions from Brean
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
How long does resealing take?
Generally a couple of hours, then it needs to cure.
Do you need bath resealing in Brean?
Poor ventilation speeds things up: damp hangs around, and mould grows faster.
Signs it’s time to call us include:
- Silicone smeared on tiles
- Missing sealant behind the taps
- Damp near the bath
- Old sealant that looks dirty
Before you book anyone
- What happens if they find more damage
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- How your room will be protected
Covering Brean
Brean is about 4 miles north of Burnham-on-Sea, in Somerset. Customers in Brean get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Brean is one of 640 towns and villages in Somerset where we work.
Every address in TA8 is covered, from the main roads to the quietest streets. Local streets include Pinewood Way, South Road and Hill View. Neighbouring places we cover include Berrow (2 miles south), Batch (2 miles east), Purn (2 miles north-east), Uphill (3 miles north-east) and Lympsham (3 miles east). Larger places within reach include Bridgwater (11 miles south), Burnham-on-Sea (4 miles south), Cheddar (10 miles east), Sydenham (12 miles south), Highbridge (5 miles south) and North Petherton (14 miles south).
Local landmarks in Brean
In Brean, that means homes near Seagull Inn and Church of St Bridget, among other places. The closest station to Brean is Weston-Super-Mare station, roughly 3.9 miles north-east of the centre. Nearby you will also find Yielding Tree Railway Museum (2.4 miles north-east) and Weston General Hospital (2.6 miles north-east). The countryside around Brean includes Brean Down.
When a repair is not the answer
It helps to know what we cannot do:
- Tiles that move, until they’re refixed
- Rotten walls or floors behind the bath
- Very wide gaps that need a trim
If in doubt, send photos and we will say what we think.
Materials we repair
- Baths
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Shower trays & enclosures
Landlords, agents and businesses in Brean
Landlords, letting agents and housing providers in Brean use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Also in Brean
What your bath or shower is made of matters
Shower trays
Trays are sealed with weight on them, for the same reason.
Baths
We fill the bath before sealing, to open the joint fully.
Looking after it afterwards
To keep it looking its best:
- Wipe the joints dry after use
- Let steam out after showers
- Clean the joints with a mild cleaner
- Store bottles on a shelf
Keep the room well ventilated, and dry the joints after bathing.
Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.
What happens on the day
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. It normally takes around two hours.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Ask for a price
To get a price, send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
