Kent · England
Bath chip & crack repair in Bridge, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Bridge. Free, fixed quotes from your pictures.
- Repairs from £95
- A kit repair that didn’t last
- A cracked acrylic bath
Bath repair in Bridge, done in place
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Common call-outs are for damage done while the bathroom was being fitted and holes from dropped items, in pressed steel enamel, acrylic and cast iron enamel.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Bridge (CT4)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why choose Surface Doctor in Bridge
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
- One-year guarantee on every repair
- Same prices wherever you are
Read our prices page or resurfacing vs replacement cost guide.
When a repair isn’t the answer
A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
Send us pictures and we will tell you honestly.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Put a towel in the bath if you’re working above it
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. Allow a few hours, depending on the damage.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the next day, the bath is ready to use.
Getting ready for the visit
- Clear the area around the damage
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Ask for a price
If you’re in Bridge and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Nearby places to Bridge
What else we do in Bridge
What affects the price in Bridge
Prices start from £95. There is no area surcharge for Bridge. The price reflects:
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- What kind of damage it is
- What the surface is made of
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
When you take your pictures, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- A wider photo showing the whole bath
To get a price, send two or three photos through our quote form or ring us. We’ll say immediately whether it can be repaired.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Signs you need bath repair in Bridge
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Get in touch if you’ve noticed:
- Hairline or through cracks in acrylic
- An old repair that has yellowed or come loose
- A chipped rim or side
- Snagging damage from a refit
Before you book anyone
- What protection goes down before work starts
- How soon you can use it again
- Whether the price covers travel
- Who will actually do the work
About Bridge
Bridge is about 3 miles south-east of Canterbury, in Kent. Whether you are in the middle of Bridge or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 922 places in Kent. Our jobs stretch from Bridge to London (55 miles away).
We work across the CT4 postcode area and the streets around it. Local streets include High Street, Station Road and Western Avenue. Other places close to Bridge include Patrixbourne (1 mile north-east), Bishopsbourne (1 mile south), Bekesbourne Hill (1 mile north-east), Bekesbourne (1 mile north-east) and Kingston (2 miles south-east). Within a short drive, we also cover Ashford (13 miles south-west), Canterbury (3 miles north-west), Margate (15 miles north-east), Dover (11 miles south-east), Folkestone (11 miles south) and Ramsgate (14 miles north-east).
Around Bridge
We visit homes around The Bridge Arms, St. Anselm's Catholic School and Church of St Peter and the streets around them. The closest station to Bridge is Bekesbourne station, about 1.2 miles north-east of the centre. Well-known places in the area include Canterbury Roman Museum (2.9 miles north-west) and Kent and Canterbury Hospital (2.1 miles north-west). For a walk, there’s Blean Woods RSPB Reserve.
Bridge: your questions answered
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How long before I can use the bath?
Usually within a day, though it depends on what we have done.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Can you repair a hole in a bath?
Typically. Photos of the hole and the underside help us check.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
