Kent · England
Bath & shower resealing (mastic) in Brookland, Kent
Local bath resealing for Brookland: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- An untidy old seal
- Black spots in the silicone
- Water getting behind the bath or tray
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Bath resealing in Brookland without replacing anything
Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. Most jobs take a couple of hours, plus curing time. If you are dealing with damp near the bath and mould you can’t clean out, we can help, on kitchen worktops & sinks, shower trays & enclosures and basins & vanity units alike.
Every repair is covered by a one-year guarantee, wherever you are in Kent.
- Where
- Brookland (TN29)
- Area hub
- Kent
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Brookland questions
How long will it take?
Most reseals take about two hours. Leave it to cure before use.
Why does my sealant keep splitting?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you work in Brookland?
We do. We send a technician to Brookland for every job, with no extra charge for travel.
How much does bath resealing cost in Brookland?
Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
It’s been repaired before. Can you still fix it?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
Why it’s worth resealing in Brookland
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with no extras added later.
Why Brookland clients choose us
- Dust sheets down, tidy finish
- Typically one visit, start to finish
- Free fixed quotes from pictures
- We will tell you if it’s not worth repairing
Read our pricing.
Aftercare tips
So the finish stays in good condition for years:
- Dry the seal after bathing
- Open a window after bathing
- Store bottles on a shelf
- Reseal at the first sign of lifting
Avoid scraping the joints, and do not stand bottles on the seal.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Covering Brookland
Brookland is about 10 miles south of Ashford, in Kent. Jobs in Brookland are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 922 places across Kent. You can also see our page for London, about 53 miles away.
We cover every part of TN29 and the streets around it. That includes homes on High Street, Brook Grove and Rye Road. Nearby, we also work in Brenzett (1 mile north-east), Snargate (2 miles north), Ivychurch (3 miles north-east), Old Romney (3 miles east) and Appledore (3 miles north-west). Within a short drive, we also cover Ashford (10 miles north), Hythe (12 miles north-east), Tenterden (8 miles north-west), Cheriton (15 miles north-east), Kennington (12 miles north) and New Romney (5 miles east).
What’s near Brookland
Locally, our jobs take us to homes close to The Royal Oak Inn, Brookland Church of England Primary School and St Augustine's Church, among other places. The nearest railway station is Appledore (Kent) station, roughly 2.5 miles north of the centre. Further afield, we also cover the area around Brenzett Aeronautical Museum (1.6 miles north-east) and Romney 'castle' (2.9 miles east). Not far away are Burnthouse Pen.
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
Honest limits
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath or tray that moves, until its support is fixed
- Gaps too big for silicone alone
- Hollow or loose tiles
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Wet rooms
Nearby places to Brookland
More services for Brookland
How we price bath resealing
We do not charge extra for travel to Brookland. The price comes down to:
- The material
- The colour and finish to match
- Any earlier repairs that need removing first
- How much damage there is
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
Before you send photos, a few simple things make all the difference:
- Details of any past repairs
- What it’s made of, if you know
- A close-up of the damage, in focus
- Your postcode, so we can check dates
For a price in Brookland, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to about two hours for a bath, including clearing up.
- The surrounding area is protected and the joints masked.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Let us know which floor the room is on
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
