Kent · England
Bath Repair for Brookland homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Brookland, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Chips caused by builders
Bath repair at your home in Brookland
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We’re frequently asked to fix chips along the edge of the bath and snagging damage from a refit, on cast iron enamel, roll-top & freestanding and pressed steel enamel.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Brookland (TN29)
- County
- Kent
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Places near Brookland
Other services in Brookland
Covering Brookland
Brookland is about 10 miles south of Ashford, in Kent. Jobs in Brookland are booked in like any other job: a fixed quote from photos, then a visit to do the work. Brookland is one of 922 towns and villages in Kent we cover. Our nearest city page is London, about 53 miles away.
Jobs in TN29 work the same way as everywhere else we cover. We regularly work on streets such as High Street, Brook Grove and Rye Road and the roads around them. Neighbouring places we cover include Brenzett (1 mile north-east), Snargate (2 miles north), Ivychurch (3 miles north-east), Old Romney (3 miles east) and Appledore (3 miles north-west). Within a short drive, we also cover Ashford (10 miles north), Hythe (12 miles north-east), Tenterden (8 miles north-west), Cheriton (15 miles north-east), Kennington (12 miles north) and New Romney (5 miles east).
Landmarks near Brookland
Around Brookland, we work in homes near The Royal Oak Inn, Brookland Church of England Primary School and St Augustine's Church, among other places. For rail, the closest station is Appledore (Kent) station, about 2.5 miles north of the centre. Well-known places in the area include Brenzett Aeronautical Museum (1.6 miles north-east) and Romney 'castle' (2.9 miles east). Open spaces near Brookland include Burnthouse Pen.
Keeping it looking good
Looking after the surface is easy:
- Rinse the bath after use, especially in hard water areas
- Avoid scourers, wire wool and gritty cream cleaners
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Honest limits
Some jobs are not right for a repair, including:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Landlord and trade work in Brookland
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Prices and what affects them
Repairs from £95. Prices are worked out job by job, from your pictures. What matters most is:
- How much damage there is
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
The price reflects the work involved, not where you live. The full price is agreed before booking.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- One picture of the entire bath
- Natural light rather than flash
- Where you are, by postcode
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
When to call us in Brookland
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- Holes from dropped items
- Rust by the waste and overflow
- A cracked acrylic bath
- Scratches you can feel with a fingernail
What to look for in a quote
- What happens if the damage is worse than the photos show
- Whether cleaning and preparation are in the price
- How soon you can use it again
- Whether the price is fixed and includes VAT
What happens on the day
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Related advice
Your questions about bath repair in Brookland
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
About our accreditations · Every repair comes with a one-year guarantee.
