Wiltshire · England
Bath & shower resealing (mastic) in Brookside, Wiltshire
We travel to Brookside for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.
- Mould you cannot clean out
- Water getting behind the bath or tray
- Stained silicone
About our bath resealing in Brookside
We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, plus curing time. If you are dealing with gaps by the taps and sealant that’s split or lifting, we can help.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Brookside (SN15)
- County
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath resealing
Prices are worked out job by job, from your pictures. The main factors are:
- The colour and finish to match
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A wider photo showing the entire bath or shower
- Natural light rather than flash
- What it’s made of, if you know
- Something in shot to show the size
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed quote the same day in most cases.
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- Gaps so wide they need filling or trims before sealing
- Hollow or loose tiles
- Rotten walls or floors behind the bath
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
Landlord and trade work in Brookside
Landlords, letting agents and housing providers in Brookside use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Do you need bath resealing in Brookside?
Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.
Most people get in touch after spotting one of these:
- Silicone smeared on tiles
- Black mould in the sealant
- Missing sealant behind the taps
- Leaks at the edges
What your quote should include
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- How to look after the finish
- How changes to the job are handled
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Where we work around Brookside
Brookside is about 4 miles north-east of Chippenham, in Wiltshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover all 425 towns and villages across Wiltshire. We work right across the region, from Brookside to Birmingham (about 67 miles away).
Our visits in SN15 work the same way as everywhere else we cover. If you’re just outside Brookside, we cover Sutton Benger (1 mile south), Upper Seagry (1 mile north), Christian Malford (1 mile east), Upper Town (2 miles east) and Great Somerford (2 miles north-east). We also work in nearby towns such as Trowbridge (14 miles south-west), Chippenham (4 miles south-west), Calne (6 miles south-east), Devizes (12 miles south), Melksham (10 miles south) and Corsham (8 miles south-west).
What’s near Brookside
We visit homes around La Flambé Restaurant pub, Sutton Benger Church of England Aided Primary School and Church of All Saints and the streets around them. Brookside’s nearest station is Chippenham station, roughly 3.9 miles south-west of the centre. Well-known places in the area include Chippenham Community Hospital (4.7 miles south-west) and Great Somerford (2.5 miles north-east). The countryside around Brookside includes Great Wood.
Also near Brookside
Also in Brookside
Brookside: your questions answered
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
How long does a reseal take?
Most reseals take about two hours. It then needs time to cure.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.
Different materials, different repairs
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
How to look after the repair
Most damage we see is avoidable. These habits help:
- Run the extractor fan during and after showers
- Clean the sealant gently and regularly
- Let steam out after showers
- Reseal at the first sign of lifting
Keep the room well ventilated, and dry the joints after bathing.
Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a couple of hours. We clean up when we’re done and let you know when you can use it again.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Preparing for the visit
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
