Redcar and Cleveland · England

Bath Resealing in Brotton

Our repair technicians come to Brotton for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Sealant that is split or lifting
  • Mould you can’t clean out
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Brotton?

About our bath resealing in Brotton

A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they keep water out. Whether it’s silicone coming away from the tiles and stained silicone, we can normally put it right, on basins & vanity units, wet rooms and kitchen worktops & sinks alike.

All our work is covered by our one-year guarantee.

Area
Brotton (TS12)
County
Redcar and Cleveland
Warranty
A year, on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Signs you need bath resealing in Brotton

Sealant splits when the bath or tray moves, frequently because it was sealed while the bath was empty.

People generally call us after spotting one of these:

  • Stained silicone
  • Silicone coming away from the tiles
  • Black mould in the sealant
  • Unsealed corners

Questions to ask before booking

  • Whether the price is fixed and includes VAT
  • Whether a trained technician does the job
  • How your room will be protected
  • How long the guarantee is and what it covers

How to compare quotes

Landlords, agents and businesses in Brotton

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

The process

You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It normally takes a couple of hours, and you’re welcome to carry on with your day while we work.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area
  • Avoid using the area for a few hours before we arrive

Ask for a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price the same day in most cases.

Get a fixed price

Advice

Looking after it afterwards

Looking after the surface is easy, and it makes a real difference:

  • Wipe the joints dry after use
  • Store bottles on a shelf
  • Clean the joints with a mild cleaner
  • Replace the seal when mould sets in

Good ventilation is the best protection, and dry the joints after bathing to keep mould away.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

Why reseal now?

Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why us?

  • Fixed prices from your pictures
  • Work done at your home or business
  • CHAS and Constructionline accredited
  • One visit for most repairs

See our prices page.

Our work in Brotton

Brotton is about 5 miles north-east of Guisborough, in Redcar and Cleveland. Customers in Brotton get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Brotton is one of 48 towns and villages in Redcar and Cleveland we cover. Our nearest city page is Newcastle upon Tyne, about 40 miles away.

Our visits in TS12 work the same way as everywhere else we cover. You’ll find streets such as High Street, Dixon Street and Hutchinson Street, all of which we cover. If you are just outside Brotton, we cover North Skelton (1 mile south-west), Kilton (1 mile south-east), Carlin How (1 mile east), Kilton Thorpe (1 mile south) and Skinningrove (1 mile east). Further out, we also cover Redcar (6 miles north-west), Guisborough (5 miles south-west), Eston (9 miles west), Marske-by-the-Sea (4 miles north-west), Grangetown (8 miles west) and South Bank (9 miles west). Brotton is one of the larger places we cover in Redcar and Cleveland.

Landmarks near Brotton

Our clients here include homes close to Badger Hill Academy, Freebrough Academy and Church of St Margaret of Antioch. The nearest railway station is Saltburn station, roughly 1.8 miles north-west. Further afield, we also cover the area around Redcar Primary Care Hospital (5.7 miles north-west) and Kilton Castle (1.6 miles south-east). For a walk, there is Freebrough Hill.

Map of Brotton © OpenStreetMap contributors

Brotton: your questions answered

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Why does my sealant keep splitting?

Usually because the bath or tray moves. We seal baths full of water.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you seal over the old sealant?

We always remove the old sealant completely. Fresh silicone doesn’t stick to old.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll tell you when the room can be used again.

How long before I can shower?

Usually after around 24 hours. We will tell you the exact time.

When we’d advise against a repair

Before you book, it’s worth knowing the limits:

  • Hidden water damage
  • Gaps so wide they need filling or trims before sealing
  • Loose tiles, which need refixing first

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths
  • Wet rooms

How we price bath resealing

There’s no area surcharge for Brotton. The price reflects:

  • The type of damage
  • The colour and finish to match
  • How many items we do on one visit
  • The material and finish

There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • What it’s made of, if you know
  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Different materials, different repairs

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Baths

Baths are resealed with water in them, to open the joint fully.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.