Redcar and Cleveland · England
Bath Re-enamelling in Brotton
Bath re-enamelling for Brotton, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- Lots of chips and rust spots
Bath re-enamelling in Brotton without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean, in acrylic baths, basins & shower trays and pressed steel baths.
Every job is backed for twelve months in Brotton and everywhere else. If something goes wrong with the work, we come back.
- Location
- Brotton (TS12)
- County
- Redcar and Cleveland
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Brotton and nearby
Brotton is about 5 miles north-east of Guisborough, in Redcar and Cleveland. Whether you’re in the middle of Brotton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Brotton is one of 48 towns and villages in Redcar and Cleveland where we work. Our nearest city page is Newcastle upon Tyne, about 40 miles away.
All of TS12 is covered. Whether you live on High Street, Dixon Street and Hutchinson Street or anywhere nearby, we can come to you. Nearby, we also work in North Skelton (1 mile south-west), Kilton (1 mile south-east), Carlin How (1 mile east), Kilton Thorpe (1 mile south) and Skinningrove (1 mile east). Larger places within reach include Redcar (6 miles north-west), Guisborough (5 miles south-west), Eston (9 miles west), Marske-by-the-Sea (4 miles north-west), Grangetown (8 miles west) and South Bank (9 miles west). Brotton is among the bigger towns we cover in Redcar and Cleveland.
Local landmarks in Brotton
In Brotton, that means homes near Badger Hill Academy, Freebrough Academy and Church of St Margaret of Antioch, among other places. For rail, the closest station is Saltburn station, roughly 1.8 miles north-west. Well-known places in the area include Redcar Primary Care Hospital (5.7 miles north-west) and Kilton Castle (1.6 miles south-east). The countryside around Brotton includes Freebrough Hill.
Aftercare tips
Simple care helps the repair last. We recommend:
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- Wash away dyes and oils after use
- Keep suction mats out of the bath
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Your questions about bath re-enamelling in Brotton
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you cover the entire of Redcar and Cleveland?
We work UK-wide. Our prices are the same everywhere.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
What happens if you find more damage?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Brotton.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- A year’s guarantee on all work
- No extra charge for your area
- Colours mixed by hand to suit your surface
- Technicians who travel to you, UK-wide
Read our prices page and bath cost comparison.
Nearby places to Brotton
Also in Brotton
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Brotton. The price depends on:
- Access to the area
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The material and finish
The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Details of any past repairs
- The material, if you know it
If you are in Brotton and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day, including clearing up.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the following day.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
What we are called out for in Brotton
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
These are the problems we are asked about most:
- A coloured bath you want in white
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
Comparing quotes
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- What preparation is included
- What happens if the damage is worse than the photos show
About our accreditations · Every repair comes with a one-year guarantee.
