Moray · Scotland
Bath Resealing for Burghead homes
Bath, shower and sink resealing with new mould-resistant silicone at your home in Burghead, with a one-year guarantee on every repair.
- Unsealed corners
- Black spots in the silicone
- Silicone coming away from the tiles
Bath resealing in Burghead without replacing anything
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. We work on wet rooms, baths and kitchen worktops & sinks, and the jobs we see most are discoloured, yellow sealant and mould you can’t clean out.
Every repair comes with a one-year guarantee, wherever you are in Moray.
- Area
- Burghead (IV30)
- Area hub
- Moray
- Warranty
- One year on every repair
- Quote
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Burghead
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs in Moray and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Different materials, different repairs
Baths
Baths are resealed with water in them, to open the joint fully.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
How it works
You do not need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take a couple of hours, and you are welcome to carry on with your day while we work.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Movement in the bath or tray
- Gaps so wide they need filling or trims before sealing
- Rotten walls or floors behind the bath
Send us pictures and we’ll tell you honestly.
Materials we work on in Burghead
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
Towns and villages near Burghead
Other services in Burghead
Where we work around Burghead
Burghead is about 7 miles north-west of Elgin, in Moray. From the centre of Burghead to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 58 places across Moray, from the larger towns to small villages.
Every address in IV30 is covered. Local streets include Station Road, Kinloss Street and Mcdonald Crescent, and we cover them all. Burghead sits on or near the B9013 and B9040, which makes travel easy. Neighbouring places we cover include Cummingston (1 mile east), Backlands (2 miles east), Hopeman (2 miles east), College of Roseisle (2 miles south-east) and Duffus (3 miles east). Larger places within reach include Elgin (7 miles south-east), Forres (8 miles south-west), Lossiemouth (7 miles east), Ashgrove (8 miles south-east), Lhanbryde (11 miles south-east) and Kinloss (5 miles south-west). As one of the bigger places in Moray, Burghead is somewhere we visit frequently. If you are somewhere remote, call first so we can plan the visit.
What’s near Burghead
Typical jobs here are in homes near Burghead and the streets around them. Other landmarks nearby include Inverugie Castle (2.3 miles east).
Your questions about bath resealing in Burghead
When can I use the bath after resealing?
We will give you the curing time, normally around a day.
Are there extra charges for Burghead?
Travel is included in the price, and we charge the same wherever you are.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
What affects the price in Burghead
Quotes are free and the price is fixed. What we look at:
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- The material
- Doing more than one item at once
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- One picture of the entire bath or shower
- The material, if you know it
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You will get a fixed quote, not an estimate.
Common problems we fix in Burghead
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
Keep an eye out for any of the following:
- Unsealed corners
- Water getting behind the bath or tray
- An untidy old seal
- Old sealant that looks dirty
What your quote should include
- What happens if the damage is worse than the photos show
- How to look after the finish
- The length of the guarantee and what it covers
- If travel is included in the price
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Reseal at the first sign of lifting
- Keep bottles off the joints
- Use the extractor fan
- Wipe the joints dry after use
Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
About our accreditations · Every repair comes with a one-year guarantee.
