Bath and North East Somerset · England

Bath & shower resealing (mastic) in Burnett, Bath and North East Somerset

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Burnett. Send pictures for a free, fixed quote.

  • Mould you cannot clean out
  • Gaps by the taps
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Burnett?

Resealing in Burnett: why it matters

A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

What you get with us

  • We’ll tell you if it’s not worth repairing
  • CHAS and Constructionline accredited
  • One-year guarantee on every repair
  • One price list for the entire UK

Take a look at our full price list.

Bath resealing in Burnett, done in place

Resealing is quick, but it transforms the look. Clean, white joints make a bathroom look cared for, and they protect the walls and floor. Whether it’s a messy previous reseal and damp near the bath, we can help.

A one-year guarantee comes as standard, so you’re covered after the visit.

Location
Burnett (BS31)
Area hub
Bath and North East Somerset
Guarantee
A year, on every repair
Price
Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Common questions in Burnett

How much does bath resealing cost in Burnett?

We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Can you reseal over the old silicone?

Never over old. The old sealant is cut out and the joint cleaned and dried.

What if the damage is worse than the photos show?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

How long does a reseal take?

Generally a couple of hours, plus curing time.

Is there a guarantee?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so let us know about it.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Landlords, agents and businesses in Burnett

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

About Burnett

Burnett is about 2 miles south-east of Keynsham, in Bath and North East Somerset. Our technicians come to homes and businesses in Burnett, so you do not need to take anything anywhere. Burnett is one of 136 towns and villages in Bath and North East Somerset we cover. We work right across the region, from Burnett to Birmingham (79 miles away).

Postcode districts we cover here: BS31. Nearby, we also work in Corston (2 miles east), Stanton Prior (2 miles south-east), Marksbury (2 miles south), Newton St Loe (3 miles east) and Farmborough (3 miles south). Further out, we also cover Bath (5 miles east), Bathwick (6 miles east), Walcot (5 miles east), Westmoreland (4 miles east), Kingsmead (5 miles east) and Bear Flat (5 miles east).

Around Burnett

In Burnett, that means homes near The Wheatsheaf pub, Church of St Michael and Wellsway School and the streets around them. The nearest railway station is Keynsham station, roughly 2.2 miles north of the centre. Well-known places in the area include Willsbridge Castle (3.2 miles north) and Royal United Hospital (3.9 miles east). Not far away are Hunstrete Lake.

Map of Burnett © OpenStreetMap contributors

What we’re called out for in Burnett

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.

Keep an eye out for any of the following:

  • A messy previous reseal
  • Discoloured, yellow sealant
  • Sealant that is split or lifting
  • Unsealed corners

Questions to ask before you book

  • Whether the price is fixed and includes VAT
  • What protection goes down before work starts
  • Whether they match the colour on site
  • How long it needs to cure

Our hiring checklist

Honest limits

Honesty matters more than a booking, so here’s what a repair will not do:

  • Rotten walls or floors behind the bath
  • A flexing bath
  • Hollow or loose tiles

Send us photos and we’ll tell you honestly.

What we work on

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths
  • Wet rooms

How the visit works

Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes about two hours for a bath, and we leave the room as we found it.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Let us know which floor the room is on
  • Move bottles, mats and clutter away from the area
  • Keep a parking space free if you can

Getting a price

If you are in Burnett and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Get a fixed price

Read more

How to look after the repair

Looking after the surface is easy:

  • Air the room after use
  • Keep the joints dry
  • Run the extractor fan during and after showers
  • Clean the sealant gently and regularly

Keep the room well ventilated, and dry the joints after bathing to keep mould away.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.