Bath and North East Somerset · England
Bath & shower resealing (mastic) in Corston, Bath and North East Somerset
Bath resealing in and around Corston: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Black spots in the silicone
- Discoloured, yellow sealant
- Silicone smeared on tiles
Corston and the surrounding area
Corston is about 3 miles south-east of Keynsham, in Bath and North East Somerset. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We cover all 136 towns and villages across Bath and North East Somerset. Our jobs stretch from Corston to Birmingham (about 78 miles away).
Jobs in BA2 work the same way as everywhere else we cover. Jobs here include addresses on The Orchard, Corston Lane and Cotton Mead and the roads around them. We also travel to Newton St Loe (1 mile south-east), Stanton Prior (2 miles south-west), Whiteway (2 miles south-east), Burnett (2 miles west) and Englishcombe (2 miles south-east). Larger places within reach include Bath (3 miles east), Keynsham (3 miles north-west), Bathwick (4 miles east), Walcot (4 miles east), Kingsmead (3 miles east) and Bear Flat (3 miles east).
Landmarks near Corston
Our customers here include homes close to The Globe Inn, Oldfield School and Church of All Saints, among other places. The closest station to Corston is Oldfield Park station, roughly 2.6 miles east. Well-known places in the area include Royal United Hospital (2.1 miles east) and Beckfords Tower And Museum (2.9 miles north-east). Not far away are Hunstrete Lake.
Bath resealing at your home in Corston
Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours. Whether it’s a messy previous reseal and damp near the bath, we can help, whatever the material.
Every repair is covered by a one-year guarantee.
- Area
- Corston (BA2)
- County
- Bath and North East Somerset
- Guarantee
- One year on every repair
- Price
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Clean the sealant gently and regularly
- Run the extractor fan during and after showers
- Keep bottles off the joints
- Let steam out after showers
Do not scrape the sealant with anything sharp, and do not stand bottles on the seal.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.
Why reseal now?
Putting new silicone over old doesn’t last. It soon peels, and mould stays trapped behind it. We remove the old sealant completely. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Corston customers choose us
- No need to remove anything
- Straight answers about what a repair can do
- Normally one visit, start to finish
- Every repair guaranteed for a year
Read our prices page.
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
How it works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take around two hours, and you are welcome to carry on with your day while we work.
- First we strip out every bit of the old mastic.
- Next we clean the joint and deal with mould.
- We ensure the joint is completely dry.
- For a bath, we fill it with water first so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Preparing for the visit
- Ensure the room can be ventilated
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
Get a quote
For a price in Corston, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair cannot fix:
- Gaps too big for silicone alone
- Rotten walls or floors behind the bath
- Loose tiles, which need refixing first
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Baths
- Basins & vanity units
What else we do in Corston
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What bath resealing costs
You will know the full cost before you book. We look at:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- Access to the area
- The size and number of damaged areas
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- A wider photo showing the whole bath or shower
- A coin or ruler next to the damage for scale
Send us photos of the damage and one of the whole item, with your BA2 postcode, and we’ll reply with a fixed quote.
FAQs for Corston
How long before I can shower?
Generally after around 24 hours. We confirm before we leave.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
Why does my sealant keep going mouldy?
Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can new silicone go over old?
We always remove the old sealant completely. New silicone won’t bond to old.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Signs you need bath resealing in Corston
Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.
You may need us if you’ve spotted:
- Gaps by the taps
- Mould you cannot clean out
- Damp near the bath
- Gaps in the seal
What your quote should include
- What prep work is covered
- If travel is included in the price
- How to care for the finish
- The length of the guarantee and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
