East Riding of Yorkshire · England
Bath & shower resealing (mastic) in Burton Fleming, East Riding of Yorkshire
Our technicians come to Burton Fleming for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Water getting behind the bath or tray
- Mould you can’t clean out
- Discoloured, yellow sealant
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take a couple of hours.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We ensure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Getting ready for the visit
- Let us know which floor the room is on
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
Get a quote
To get a price, send a couple of photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
About our bath resealing in Burton Fleming
Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. We work on basins & vanity units, wet rooms and kitchen worktops & sinks, and common reasons people contact us are silicone smeared on tiles and leaks at the edges.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Burton Fleming (YO25)
- County
- East Riding of Yorkshire
- Cover
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Burton Fleming
More services for Burton Fleming
Do you need bath resealing in Burton Fleming?
Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.
Typical reasons for a call-out include:
- Gaps in the seal
- Gaps by the taps
- Stained silicone
- Black mould in the sealant
Before you book anyone
- Whether the price covers travel
- How to look after the finish
- How the colour is matched
- Who turns up on the day
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Water damage behind the bath that needs a builder
- Hollow or loose tiles
- Very wide gaps that need a trim
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Burton Fleming
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
Why reseal now?
A reseal is one of the cheapest bathroom jobs there is, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
- We leave the room as we found it
Read our prices page.
Burton Fleming and the surrounding area
Burton Fleming is about 7 miles north-west of Bridlington, in East Riding of Yorkshire. From the centre of Burton Fleming to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 299 places in East Riding of Yorkshire. Our jobs stretch from Burton Fleming to Leeds (about 54 miles away).
Every address in YO25 is covered, from the main roads to the quietest streets. Streets in the area include Church Farm Court, Front Street and Milsons Lane, all of which we cover. If you’re just outside Burton Fleming, we cover Wold Newton (2 miles west), Thwing (2 miles south-west), Rudston (3 miles south), Grindale (3 miles east) and Hunmanby (3 miles north). Within a short drive, we also cover Bridlington (7 miles south-east), Driffield (10 miles south-west), Hilderthorpe (7 miles south-east), Flamborough (9 miles east), Nafferton (8 miles south) and Hutton Cranswick (13 miles south).
Near you in Burton Fleming
In Burton Fleming, that means homes near Church of St Cuthbert and the streets around them. For rail, the closest station is Hunmanby station, roughly 3 miles north-east.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Clean the sealant gently and regularly
- Keep the joints dry
- Air the room after use
- Use the extractor fan
Let it cure fully before using the bath or shower, typically around 24 hours.
Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Burton Fleming questions
Why does the silicone keep cracking?
Normally because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.
How long before I can shower?
Normally about a day later. We confirm before we leave.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can new silicone go over old?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
How long does resealing take?
Around two hours for a bath, then it needs to cure.
Prices and what affects them
We charge the same across the UK, including Burton Fleming. What changes the price is:
- How many items we do on one visit
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- The material and finish
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your photos
You can take the pictures on your phone. Just ensure we can see:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- A wider photo showing the entire bath or shower
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
Baths are resealed with water in them, to open the joint fully.
About our accreditations · Every repair comes with a one-year guarantee.
