East Riding of Yorkshire · England
Bath & shower resealing (mastic) in Camerton, East Riding of Yorkshire
Bath, shower and sink resealing with new mould-resistant silicone in Camerton, carried out at your home and guaranteed for a year.
- Unsealed corners
- Damp near the bath
- Sealant that is split or lifting
About our bath resealing in Camerton
All of the old sealant is cut out, treat any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We are frequently asked to fix mould you can’t clean out and sealant that’s split or lifting, across shower trays & enclosures, baths and kitchen worktops & sinks.
You get a one-year guarantee, the same in Camerton as everywhere else we work.
- Location
- Camerton (HU12)
- Area hub
- East Riding of Yorkshire
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in East Riding of Yorkshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Camerton questions
Why does my sealant keep going mouldy?
Mould needs moisture. Ventilation and drying keep it clean longer.
Can new silicone go over old?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
How long does resealing take?
A bath or shower typically takes a couple of hours. It then needs time to cure.
What happens next?
You will get a fixed quote back, plus dates. You’re under no obligation.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a couple of hours. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
How to prepare
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
Getting a price
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Why it’s worth resealing in Camerton
Resealing costs very little, and it protects everything around the bath. Leaving failed sealant can let water cause damage that costs far more to fix. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why Camerton clients choose us
- Nothing taken out or refitted
- Honest advice, even when it means no job
- Normally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page.
Honest limits
It helps to know what we can’t do:
- Very wide gaps that need a trim
- Movement in the bath or tray
- Hidden water damage
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
- Baths
- Basins & vanity units
What we are called out for in Camerton
Most reseals are because of black mould. It grows into the silicone, so cleaning only removes the surface.
Signs it’s time to call us include:
- Gaps in the seal
- Damp near the bath
- Gaps by the taps
- An untidy old seal
What your quote should include
- A fixed price, and whether VAT is included
- What preparation is included
- What aftercare is recommended
- Whether a trained technician does the job
Where we work around Camerton
Camerton is about 8 miles east of Kingston upon Hull, in East Riding of Yorkshire. Jobs in Camerton are booked in like any other job: a fixed quote from photos, then a visit to do the work. Camerton is one of 299 towns and villages in East Riding of Yorkshire we cover. We work right across the region, from Camerton to Leeds (about 58 miles away).
Here we cover the HU12 postcode area. From Station Road and Main Road or anywhere nearby, a technician can come to you. We also travel to Ryehill (1 mile south), Burstwick (1 mile north-east), Thorngumbald (1 mile west), Keyingham (2 miles south-east) and Hedon (2 miles north-west). Within a short drive, we also cover Beverley (14 miles north-west), Hessle (12 miles west), Cottingham (12 miles west), Hornsea (13 miles north), Anlaby (12 miles west) and Willerby (12 miles west).
What’s near Camerton
In Camerton, that means homes near Burstwick Community Primary School, The Crooked Billet pub and All Saints' Church, among other places. Well-known places in the area include Burstwick Castle (1.5 miles north) and Hedon Museum (2.4 miles north-west).
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Use the extractor fan
- Open a window after bathing
- Keep the joints dry
- Clean the joints with a mild cleaner
Don’t scrape the sealant with anything sharp, and don’t stand bottles on the seal.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Repairs by material
Shower trays
We put weight on a tray before sealing it, for the same reason.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Towns and villages near Camerton
Also in Camerton
About our accreditations · Every repair comes with a one-year guarantee.
