Somerset · England

Bath Resealing in Cannington

Bath, shower and sink resealing with new mould-resistant silicone in Cannington, carried out at your home and guaranteed for a year.

  • Damp near the bath
  • An untidy old seal
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Cannington

Common problems we fix in Cannington

Sealant does not last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.

Contact us if you’ve noticed:

  • Unsealed corners
  • An untidy old seal
  • Discoloured, yellow sealant
  • Mould you cannot clean out

What your quote should include

  • Whether they match the colour on site
  • Whether cleaning and preparation are in the price
  • What aftercare is recommended
  • How changes to the job are handled

How to compare quotes

How we handle bath resealing in Cannington

All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Typical jobs include damp near the bath and old sealant that looks dirty, across basins & vanity units, wet rooms and kitchen worktops & sinks.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Where
Cannington (TA5)
County
Somerset
Cover
A year, on every repair
Quotes
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

FAQs for Cannington

How do I stop mould in sealant?

Normally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

Do you cover Cannington?

Yes. We work across the UK and travel to Cannington. Send us photos for a fixed quote, or call 0345 017 0787.

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

How long does resealing take?

Typically a couple of hours, then it needs to cure.

What information do you need?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Why does my sealant keep splitting?

Movement is the usual cause. We fill the bath before sealing it.

Will the price change on the day?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Can tenants book a repair?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

What happens on the day

On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take around two hours.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Have a window or extractor fan available
  • Plan for the room to be out of bounds to pets and children

Get a quote

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Get a fixed price

Related advice

Repairs by material

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Cannington and nearby

Cannington is about 3 miles north-west of Bridgwater, in Somerset. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Cannington is one of 640 places in Somerset we cover.

All of TA5 is within our area. Local streets include High Street, Brook Street and Main Road, and we cover them all. Close by, we cover Bradley Green (1 mile south-west), Gothelney Green (1 mile south), Edbrook (1 mile north-west), Combwich (2 miles north) and Wembdon (2 miles south-east). Larger places within reach include Taunton (9 miles south), Bridgwater (3 miles south-east), Burnham-on-Sea (7 miles north-east), Wellington (14 miles south-west), Street (14 miles east) and Glastonbury (15 miles east).

Landmarks near Cannington

Locally, our jobs take us to homes close to Church of St Mary, The Friendly Spirit pub and Brymore Academy. For rail, the closest station is Bridgwater station, about 3.4 miles south-east. Further afield, we also cover the area around Cannington Camp (1 mile north-west) and Somerset Brick and Tile Museum (3.2 miles south-east). The countryside around Cannington includes WWT Steart Marshes.

Map of Cannington © OpenStreetMap contributors

When we would advise against a repair

To be straight with you, some problems need a different fix:

  • Hollow or loose tiles
  • A flexing bath
  • Gaps too big for silicone alone

If in doubt, send photos and we will say what we think.

Materials we work on in Cannington

  • Wet rooms
  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures

What bath resealing costs

We price every job individually, from your photos. What matters most is:

  • What the surface is made of
  • Access to the area
  • The type of damage
  • The colour and finish to match

Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

When you take your photos, a few simple things make all the difference:

  • Any details about the material
  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Keeping it looking good

How the surface is treated afterwards matters:

  • Wipe the joints dry after use
  • Air the room after use
  • Use the extractor fan
  • Replace the seal when mould sets in

Avoid scraping the joints, and do not stand bottles on the seal.

Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.