Cornwall · England

Bath & shower resealing (mastic) in Carlyon Bay, Cornwall

Bath resealing in and around Carlyon Bay: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • A messy previous reseal
  • Water getting behind the bath or tray
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Carlyon Bay

Bath resealing in Carlyon Bay, done in place

A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, in a neat, continuous bead. We’re often asked to fix water getting behind the bath or tray and gaps in the seal, on kitchen worktops & sinks, wet rooms and shower trays & enclosures.

Every job is backed for twelve months in Carlyon Bay and everywhere else. If something goes wrong with the work, we come back.

Roll-top bath being refinished by a Surface Doctor technician
Where
Carlyon Bay (PL25)
County
Cornwall
Warranty
One year on every repair
Quote
Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026

How the visit works

We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes about two hours for a bath for most jobs. The room is left tidy and you will know when it can be used.

  1. All the old sealant is cut out and removed.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Preparing for the visit

  • Let us know about parking or access
  • Keep pets and children out of the room while we work
  • Open a window if you can

Get a quote

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Send pictures for a quote

Advice

When a repair is not the answer

We won’t take on work that won’t last, so these are the limits:

  • Water damage behind the bath that needs a builder
  • A bath or tray that moves, until its support is fixed
  • Gaps too big for silicone alone

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Wet rooms
  • Basins & vanity units
  • Baths

Why it’s worth resealing in Carlyon Bay

A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. We charge the same wherever you are, with no extra for Carlyon Bay. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Carlyon Bay

  • A fixed quote before booking
  • Rooms protected and left tidy
  • Most jobs done in one visit
  • No extra charge for your area

See our pricing.

FAQs for Carlyon Bay

How long does silicone take to cure?

Generally after around 24 hours. We’ll tell you the exact time.

Do you charge for travel?

We do not add a call-out fee. Your fixed quote includes everything.

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Why does my sealant keep splitting?

Usually because the bath or tray moves. We seal baths full of water.

Which areas do you work in?

All of Cornwall, and the rest of the UK. Travel is included in the price.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How do I stop mould in sealant?

Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

What affects the price in Carlyon Bay

There are no hourly rates or hidden extras. The price is based on:

  • The material and finish
  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • What kind of damage it is

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

How to get a fixed quote

Almost every job we do is priced from pictures. This is what to send:

  • Any details about the material
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • Your postcode, so we can check dates

For a price in Carlyon Bay, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Ventilate the bathroom well
  • Give the seal a regular clean
  • Replace the seal when mould sets in
  • Air the room after use

Keep the room well ventilated, and dry the joints after bathing so mould struggles to take hold.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Carlyon Bay and the surrounding area

Carlyon Bay is about 1 mile east of St Austell, in Cornwall. We visit clients in Carlyon Bay and the surrounding area, so there is no workshop to go to. We work in all 644 towns and villages across Cornwall, from the larger towns to small villages.

Our visits in PL25 work the same way as everywhere else we cover. You will find streets such as Crinnis Wood Avenue, Appletree Lane and Beach Road, all of which we cover. If you’re just outside Carlyon Bay, we cover Charlestown (1 mile west), Holmbush (1 mile west), Bethel (1 mile north-west), Tregrehan Mills (1 mile north) and Sandy Bottom (1 mile north-west). We also work in nearby towns such as Truro (15 miles west), Newquay (15 miles west), Bodmin (9 miles north), Liskeard (15 miles north-east), Addington (15 miles north-east) and Wadebridge (13 miles north).

Around Carlyon Bay

Locally, our jobs take us to homes close to St Paul's Church, Poltair Park and Charlestown Primary School and the streets around them. The nearest railway station is St Austell station, roughly 1.9 miles west. Other landmarks nearby include St Austell Community Hospital (1.4 miles south-west) and St Catherine's Castle (4.6 miles east). Open spaces near Carlyon Bay include Hensbarrow Beacon.

  • Parks and local facilities nearby include Restormel (2 miles west)
Map of Carlyon Bay © OpenStreetMap contributors

Landlord and trade work in Carlyon Bay

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

We work for landlords, letting agents and housing providers in Carlyon Bay as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.

Do you need bath resealing in Carlyon Bay?

Even good sealant eventually discolours. Steam, soap and movement all wear it down.

The things clients usually mention when they call include:

  • Damp near the bath
  • Mould you cannot clean out
  • Silicone smeared on tiles
  • Missing sealant behind the taps

Before booking anyone

  • Whether the price covers travel
  • What protection goes down before work starts
  • Who turns up on the day
  • Whether cleaning and preparation are in the price

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.