Shropshire · England
Bath & shower resealing (mastic) in Chelmarsh, Shropshire
Bath resealing in and around Chelmarsh: photo quotes, tidy work and a year’s guarantee.
- Leaks at the edges
- Mould you cannot clean out
- Old sealant that looks dirty
How we handle bath resealing in Chelmarsh
A proper reseal starts with removing every trace of the old silicone. New silicone won’t bond to old, which is why so many DIY reseals peel. We work on wet rooms, shower trays & enclosures and basins & vanity units, and the jobs we see most are black spots in the silicone and stained silicone.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Where
- Chelmarsh (WV16)
- Region
- Shropshire
- Warranty
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Water damage behind the bath that needs a builder
- A bath or tray that moves, until its support is fixed
- Gaps so wide they need filling or trims before sealing
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Chelmarsh
- Kitchen worktops & sinks
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Baths
Different materials, different repairs
Shower trays
We put weight on a tray before sealing it, for the same reason.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
What affects the price in Chelmarsh
A fixed quote means you know the cost before booking. We look at:
- Unusual colours or finishes
- Access to the area
- The material
- How much damage there is
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- What it’s made of, if you know
For a price in Chelmarsh, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Is resealing worth it?
Putting new silicone over old doesn’t last. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
What you get with us
- We leave the room as we found it
- One visit for most repairs
- A fixed quote before booking
- A year’s guarantee on all work
See our prices page.
About Chelmarsh
Chelmarsh is about 4 miles south of Bridgnorth, in Shropshire. Jobs in Chelmarsh are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in all 433 towns and villages across Shropshire, from the larger towns to small villages. Our jobs stretch from Chelmarsh to Birmingham (22 miles away).
Here we cover the WV16 postcode area. Other places close to Chelmarsh include Sutton (1 mile south-east), Billingsley (2 miles south), Eardington (2 miles north), Highley (2 miles south-east) and Danesford (3 miles north). We also work in nearby towns such as Madeley (11 miles north), Bridgnorth (4 miles north), Ludlow (15 miles south-west), Shifnal (13 miles north), Broseley (9 miles north) and Albrighton (12 miles north-east).
Landmarks near Chelmarsh
Our clients here include homes close to St Peter's Church, among other places. Well-known places in the area include Chetton Heritage Museum (3.3 miles north-west) and Bridgnorth Community Hospital (3.8 miles north).
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes a couple of hours. If anything looks different from your pictures, we will talk to you before going ahead.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Open a window if you can
- Let us know which floor the room is on
- Point us to the nearest place to park
Ask for a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams in Shropshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Your questions about bath resealing in Chelmarsh
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Do you cover the whole of Shropshire?
Everywhere in the UK, Chelmarsh included. There is no extra charge for travel.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Shropshire.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
Why does my sealant keep splitting?
Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.
How long does silicone take to cure?
Normally about a day later. We confirm before we leave.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Keep bottles off the joints
- Air the room after use
- Ventilate the bathroom well
- Wipe the joints dry after use
Leave the sealant to cure for the time we give you, normally about a day.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Also near Chelmarsh
Other services in Chelmarsh
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
