Shropshire · England

Bath & shower resealing (mastic) in Clive, Shropshire

Bath, shower and sink resealing with new mould-resistant silicone in Clive, carried out at your home and guaranteed for a year.

  • Black spots in the silicone
  • Sealant that’s split or lifting
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Clive

Repairs by material

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

We fill the bath before sealing, to open the joint fully.

Bath resealing in Clive without replacing anything

We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours, then it needs to cure. Common call-outs are for gaps by the taps and silicone coming away from the tiles, on basins & vanity units, kitchen worktops & sinks and baths.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.

Technician in a mask working on a freestanding roll-top bath
Area
Clive (SY4)
Area hub
Shropshire
Warranty
12 months on all our work
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

Landlords, agents and businesses in Clive

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Clive and nearby

Clive is about 7 miles north of Shrewsbury, in Shropshire. From the centre of Clive to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Clive is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 42 miles away.

Here we cover the SY4 postcode area. Streets in the area include High Street, Station Road and Jubilee Street, and we cover them all. We also travel to Yorton (1 mile south-west), Grinshill (1 mile south-east), Alderton (1 mile south-west), Barkers Green (3 miles north) and Myddle (3 miles west). Within a short drive, we also cover Shrewsbury (7 miles south), Oswestry (14 miles west), Market Drayton (12 miles north-east), Coleham (8 miles south), Kingsland (7 miles south) and Whitchurch (11 miles north).

Landmarks near Clive

Typical jobs here are in homes near Clive CofE Primary School and Church of All Saints and the streets around them. Clive’s nearest station is Yorton station, about 0.6 miles south-west of the centre. Well-known places in the area include Morgan Library (3 miles north) and North Shropshire (3 miles north).

Map of Clive © OpenStreetMap contributors

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Why it’s worth resealing in Clive

Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. Our prices are the same across the UK, with no extra for Clive. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why Clive clients choose us

  • One price list for the entire UK
  • Free fixed quotes from pictures
  • We will tell you if it’s not worth repairing
  • Most jobs done in one visit

Take a look at our prices page.

Looking after it afterwards

Most damage we see is avoidable. These habits help:

  • Ventilate the bathroom well
  • Open a window after bathing
  • Keep the joints dry
  • Clean the joints with a mild cleaner

Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Damp below or loose tiles need checking quickly. There may be more going on, and we’ll say if you need a builder or plumber.

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • Movement in the bath or tray
  • Rotten walls or floors behind the bath
  • Very wide gaps that need a trim

If in doubt, send photos and we will say what we think before booking.

Surfaces we repair

  • Baths
  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units

Clive questions

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Shropshire.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Is there a call-out fee?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

What areas do you cover?

Across the UK, so Clive is covered. Prices don’t change with location.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

How do I get a price for bath resealing in Clive?

The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Why does my sealant keep splitting?

Something is moving. If it keeps happening, the support may need fixing.

What bath resealing costs

Prices are worked out job by job, from your photos. The main factors are:

  • Previous DIY repairs that have to come out
  • Access to the area
  • Doing more than one item at once
  • What kind of damage it is

Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:

  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before
  • Natural light rather than flash
  • A photo taken from further back

To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.

How the visit works

You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It generally takes around two hours, and you’re welcome to carry on with your day while we work.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Preparing for the visit

  • Let us know if it has been repaired before
  • Move bottles, mats and clutter away from the area
  • Keep children and pets away from the room on the day

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed quote the same day in most cases.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.