Lancashire · England
Bath & shower resealing (mastic) in Cliviger, Lancashire
Bath resealing in and around Cliviger: photo quotes, tidy work and a year’s guarantee.
- Damp near the bath
- Unsealed corners
- An untidy old seal
Landlords, agents and businesses in Cliviger
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About our bath resealing in Cliviger
Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours. Whether it’s unsealed corners and black mould in the sealant, we can usually put it right, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Cliviger (BB10)
- County
- Lancashire
- Warranty
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
About Cliviger
Cliviger is about 3 miles south-east of Burnley, in Lancashire. Whether you are in the middle of Cliviger or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Cliviger is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Manchester, about 20 miles away.
Every address in BB10 is covered, from the main roads to the quietest streets. Whether you live on Red Lees Road, Mount Crescent and Spring View or anywhere nearby, we can come to you. We also travel to Hurstwood (1 mile north-east), Worsthorne (2 miles north), Weir (3 miles south), Portsmouth (3 miles south-east) and Cornholme (3 miles south-east). Further out, we also cover Burnley (3 miles north-west), Accrington (7 miles west), Nelson (5 miles north), Rawtenstall (6 miles south-west), Colne (6 miles north) and Clitheroe (11 miles north-west).
Near you in Cliviger
Around Cliviger, we work in homes near The Kettledrum Inn, Church of St John the Divine and Unity College. Cliviger’s nearest station is Burnley Manchester Road station, roughly 2.5 miles north-west of the centre. Other landmarks nearby include Burnley General Hospital (3.1 miles north-west) and Museum of Local Crafts And Industries (1.2 miles north-west). For a walk, there’s Rowley Lake and Towneley Castle Hill.
Repairs by material
Baths
We fill the bath before sealing, to open the joint fully.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Air the room after use
- Keep bottles off the joints
- Replace the seal when mould sets in
- Clean the joints with a mild cleaner
Let it cure fully before using the bath or shower, usually around 24 hours.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
Towns and villages near Cliviger
More services for Cliviger
How we price bath resealing
Prices are worked out job by job, from your pictures. The main factors are:
- Unusual colours or finishes
- What the surface is made of
- Any earlier repairs that need removing first
- The size and number of damaged areas
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- One sharp close-up of the damage
- Natural light rather than flash
- Something in shot to show the size
- Your postcode, so we can check dates
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes around two hours. Before we leave, we explain how soon it can be used and how to look after it.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
Ask for a price
Most clients in Cliviger get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
When a repair isn’t the answer
Before booking, it’s worth knowing the limits too:
- Gaps too big for silicone alone
- Rotten walls or floors behind the bath
- Hollow or loose tiles
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Wet rooms
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Kitchen worktops & sinks
Your questions about bath resealing in Cliviger
Do you cover Cliviger?
Yes. We cover the entire UK and come to Cliviger. Send photos and we will quote, or call 0345 017 0787.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Do you seal over the old sealant?
We always remove the old sealant completely. Fresh silicone does not stick to old.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Why does my sealant keep going mouldy?
Mould needs moisture. Ventilation and drying keep it clean longer.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Resealing in Cliviger: why it matters
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Work done at your home or business
- A fixed quote before you book
- No extra charge for your area
- Honest advice, even when it means no job
See our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
