Telford and Wrekin · England
Bath Resealing for Coalport homes
Fixed-price bath resealing in Coalport and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Damp near the bath
- Discoloured, yellow sealant
- Silicone smeared on tiles
About our bath resealing in Coalport
A fresh seal protects your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. We work on shower trays & enclosures, baths and kitchen worktops & sinks, and the jobs we see most are black spots in the silicone and gaps in the seal.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Where
- Coalport (TF8, TF7, TF12)
- Area hub
- Telford and Wrekin
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Baths
Baths are resealed with water in them, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Why reseal now?
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- One visit for most repairs
Take a look at our pricing.
Aftercare tips
How the surface is treated afterwards matters:
- Run the extractor fan during and after showers
- Clean the sealant gently and regularly
- Reseal at the first sign of lifting
- Dry the seal after bathing
Leave the sealant to cure for the time we give you, usually around 24 hours.
Damp below or loose tiles need checking quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.
About Coalport
Coalport is about 1 mile south of Madeley, in Telford and Wrekin. Customers in Coalport get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Coalport is one of 79 places in Telford and Wrekin where we work. Our nearest city page is Birmingham, about 25 miles away.
Postcode districts we cover here: TF8, TF7 and TF12. Local streets include High Street, Riverside Avenue and Coalport High Street, all of which we cover. We also cover the places around Coalport: Preens Eddy (1 mile west), The Tuckies (1 mile west), Sutton Hill (1 mile north), Jackfield (1 mile north-west) and Madeley (1 mile north). We also work in nearby towns such as Telford (5 miles north), Wellington (6 miles north-west), Dawley (3 miles north), Oakengates (5 miles north), Newport (11 miles north) and The Rock (4 miles north).
What’s near Coalport
Around Coalport, we work in homes near Church of St Mary the Virgin, Abraham Darby Academy and The Brewery Inn and the streets around them. The nearest railway station is Telford Central station, roughly 4.4 miles north. Well-known places in the area include Ryton Castle Hillfield (3.8 miles east) and Museum of The Post Office In The Community (0.9 miles north).
Landlord and trade work in Coalport
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Also near Coalport
More services for Coalport
How we price bath resealing
Quotes are free and the price is fixed. What we take into account:
- How much damage there is
- Previous DIY repairs that have to come out
- How many items we do on one visit
- The material and finish
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
You can usually get a fixed price without us visiting. To make it quick:
- What it’s made of, if you know
- Any earlier repairs or coatings
- A picture taken from further back
- A close-up of the damage, in focus
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Coalport questions
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
How long does a reseal take?
A bath or shower generally takes a couple of hours. It then needs time to cure.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
It’s been repaired before. Can you still fix it?
Generally, yes. We remove the old repair before doing a new one.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
What we’re called out for in Coalport
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning cannot get it all out.
Typical reasons for a call-out include:
- Damp near the bath
- Sealant that is split or lifting
- Discoloured, yellow sealant
- Black spots in the silicone
What to look for in a quote
- How the colour is matched
- Whether there are any call-out or travel charges
- What happens if they find more damage
- How long it needs to cure
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Gaps so wide they need filling or trims before sealing
- Loose tiles, which need refixing first
- A flexing bath
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
- Baths
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take around two hours. We clean up when we’re done and let you know when you can use it again.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Before we arrive
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
How to get a price
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
