Wiltshire · England
Bath & shower resealing (mastic) in Coate, Wiltshire
Fixed-price bath resealing in Coate and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Water getting behind the bath or tray
- Missing sealant behind the taps
- Old sealant that looks dirty
Bath resealing at your home in Coate
A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why many DIY jobs peel. We regularly repair baths, kitchen worktops & sinks and shower trays & enclosures, and the jobs we see most are damp near the bath and black spots in the silicone.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Where
- Coate (SN10)
- Region
- Wiltshire
- Guarantee
- One year on every repair
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
We fill the bath before sealing, to open the joint fully.
What we cannot put right
It helps to know what we cannot do too:
- Rotten walls or floors behind the bath
- Very wide gaps that need a trim
- A bath or tray that moves, until its support is fixed
Send us photos and we will tell you honestly.
What we work on
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
Towns and villages near Coate
More services for Coate
Where we work around Coate
Coate is about 2 miles east of Devizes, in Wiltshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 425 towns and villages in Wiltshire, from the larger towns to small villages. We work right across the region, from Coate to Birmingham (77 miles away).
All of SN10 is within our area. Jobs here include addresses on Pig Lane and Spaniels Bridge Road and the roads around them. Nearby, we also work in Little Horton (1 mile north), Bishops Cannings (1 mile north), Nursteed (2 miles south-west), Bourton (2 miles north) and Devizes (2 miles west). Within a short drive, we also cover Trowbridge (12 miles west), Chippenham (11 miles north-west), Calne (6 miles north-west), Westbury (13 miles south-west), Melksham (8 miles west) and Warminster (15 miles south-west).
Local landmarks in Coate
We visit homes around Church of St Andrew and Devizes School, among other places. Well-known places in the area include Devizes Castle (2.4 miles west) and Roundway Hospital (1.7 miles west). Not far away are Tan Hill.
- Local facilities include Kennet (2.3 miles west)
Keeping it looking good
Looking after the surface is easy:
- Air the room after use
- Use the extractor fan
- Clean the joints with a mild cleaner
- Reseal when black spots won’t clean off
Leave the sealant to cure for the time we give you, normally about a day.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Why it’s worth resealing in Coate
A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why Coate customers choose us
- Free fixed quotes from pictures
- We leave the room as we found it
- One-year guarantee on every repair
- Honest advice, even when it means no job
Take a look at our prices page.
Common problems we fix in Coate
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.
Most people contact us after spotting something like this:
- Missing sealant behind the taps
- Black spots in the silicone
- Water getting behind the bath or tray
- Silicone coming away from the tiles
What your quote should include
- How soon you can use it again
- Aftercare advice
- If travel is included in the price
- Who turns up on the day
What affects the price in Coate
You will not pay by the hour. The price depends on:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- How easy the damage is to reach
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed quote
When you take your photos, a few simple things make all the difference:
- A wider photo showing the whole bath or shower
- A coin beside the damage so we can judge size
- Where you are, by postcode
- A close-up of the damage, in focus
Most customers in Coate get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Coate questions
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
Which areas do you work in?
We work UK-wide, and that includes Coate. Our prices are the same everywhere.
My seal keeps tearing. Why?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
What happens after I send pictures?
We review the pictures and send a fixed quote with dates.
Are there extra charges for Coate?
We do not add a call-out fee. The fixed price covers the visit and the work.
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. It normally takes a couple of hours, and we will tell you if anything changes.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Before we arrive
- Let us know which floor the room is on
- Open a window if you can
- Keep a parking space free if you can
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed price without visiting.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
