Devon · England
Bath & shower resealing (mastic) in Colyford, Devon
Bath, shower and sink resealing with new mould-resistant silicone in Colyford, carried out at your home and guaranteed for a year.
- A messy previous reseal
- Black spots in the silicone
- Unsealed corners
Our work in Colyford
Colyford is about 7 miles south-east of Honiton, in Devon. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Colyford is one of 586 towns and villages in Devon where we work.
Our visits in EX24 are booked in the same way as anywhere else. Streets in the area include The Elms, Swan Hill Road and Thomas Bassett Drive, and we cover them all. If you’re just outside Colyford, we cover Colyton (1 mile north), Kingsdon (1 mile north), Axmouth (1 mile south-east), Seaton (1 mile south) and Musbury (2 miles north-east). We also work in nearby towns such as Sidmouth (8 miles west), Honiton (7 miles north-west), Cranbrook (15 miles west), Axminster (5 miles north-east), Budleigh Salterton (13 miles south-west) and Ottery St Mary (9 miles west).
What’s near Colyford
Typical jobs here are in homes near White Hart Inn, Colyton Grammar School and Colyton Primary School. Colyford’s nearest station is Axminster station, about 4.4 miles north-east. A little further out are Colcombe Castle (1.4 miles north) and Axminster Hospital (4.9 miles north-east).
Bath resealing in Colyford, done in place
We cut out all of the old sealant, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Common call-outs are for water getting behind the bath or tray and a messy previous reseal, on baths, wet rooms and kitchen worktops & sinks.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Colyford (EX24)
- Region
- Devon
- Cover
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath or shower is made of matters
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
Baths are resealed with water in them, to open the joint fully.
For landlords and businesses
We work for landlords, letting agents and housing providers in Colyford as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Other services in Colyford
Common questions in Colyford
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.
How long will it take?
A bath or shower generally takes a couple of hours. It then needs time to cure.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
How do I stop mould in sealant?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
What happens after I send photos?
We come back with a fixed price, normally with dates to choose from. There’s no obligation to book.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Why it’s worth resealing in Colyford
Resealing is a small job. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
What you get with us
- Most jobs done in one visit
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- No need to remove anything
Read our full price list.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Common problems we fix in Colyford
Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.
Keep an eye out for any of the following:
- Stained silicone
- An untidy old seal
- Leaks at the edges
- Missing sealant behind the taps
What your quote should include
- Whether there are any call-out or travel charges
- When it can be used again
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the photos show
Keeping it looking good
Once the work has cured, treat it gently:
- Wipe the joints dry after use
- Replace the seal when mould sets in
- Air the room after use
- Store bottles on a shelf
Avoid scraping the joints, and don’t stand bottles on the seal.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.
When a repair is not the answer
Some jobs aren’t right for a repair, for example:
- Loose tiles, which need refixing first
- Water damage behind the bath that needs a builder
- Gaps so wide they need filling or trims before sealing
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Basins & vanity units
- Wet rooms
- Baths
- Shower trays & enclosures
- Kitchen worktops & sinks
What happens on the day
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a couple of hours, and you can get on with other things while we are there.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Getting ready for the visit
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Have a window or extractor fan available
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job without visiting.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
