Devon · England

Bath Resealing in Whitford

Bath resealing across Whitford and nearby, done in a single visit in most cases and guaranteed for a year.

  • An untidy old seal
  • Unsealed corners
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Whitford

About our bath resealing in Whitford

We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We are frequently asked to fix discoloured, yellow sealant and black mould in the sealant, in kitchen worktops & sinks, wet rooms and basins & vanity units.

Whatever the size of the job, you get the same one-year guarantee.

Location
Whitford (EX13)
Region
Devon
Cover
12 months on all our work
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Whitford and the surrounding area

Whitford is about 7 miles south-east of Honiton, in Devon. Anywhere in EX13, we come to you. We work in 586 places in Devon.

Our visits in EX13 work the same way as everywhere else we cover. That includes homes on Hampton Lane and Park Lane. Neighbouring places we cover include Maidenhayne (1 mile east), Shute (1 mile north-west), Musbury (1 mile south-east), Kingsdon (1 mile south-west) and Colyton (2 miles south-west). Further out, we also cover Sidmouth (9 miles south-west), Honiton (7 miles north-west), Seaton (3 miles south), Cranbrook (15 miles west), Axminster (3 miles north-east) and Budleigh Salterton (15 miles south-west).

What’s near Whitford

In Whitford, that means homes near Colyton Grammar School, St Mary at the Cross and Shute Community Primary School, among other places. The nearest railway station is Axminster station, about 2.5 miles north-east of the centre. Well-known places in the area include Axminster Hospital (3 miles north-east) and Colcombe Castle (1 mile south-west).

Map of Whitford © OpenStreetMap contributors

How to look after the repair

Simple care helps the repair last. We recommend:

  • Keep bottles off the joints
  • Use the extractor fan
  • Replace the seal when mould sets in
  • Clean the joints with a mild cleaner

Avoid scraping the joints, and don’t stand bottles on the seal.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

Different materials, different repairs

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

Trays are sealed with weight on them, for the same reason.

Why reseal now?

A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Why choose Surface Doctor in Whitford

  • Generally one visit, start to finish
  • We will tell you if it’s not worth repairing
  • No extra charge for your area
  • We leave the room as we found it

See our prices page.

Whitford questions

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How long before I can shower?

You will get the curing time from us, generally around a day.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Why does my sealant keep splitting?

The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do you seal over the old sealant?

Never over old. The old sealant is cut out and the joint cleaned and dried.

The process

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a couple of hours, including clearing up.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Make sure the area is dry
  • Mention if the room is upstairs or in a flat

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed price.

Get a free quote

Related advice

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Prices and what affects them

We give every job a fixed quote from pictures. These are the things that affect it:

  • The material
  • Any earlier repairs that need removing first
  • How easy the damage is to reach
  • What kind of damage it is

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.

Quotes from your photos

Photographing the damage takes a minute, and it saves a visit. Please include:

  • A wider photo showing the entire bath or shower
  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • One sharp close-up of the damage

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.

Landlord and trade work in Whitford

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

If you manage property in Whitford, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.

Signs you need bath resealing in Whitford

No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.

Customers generally contact us about:

  • Gaps in the seal
  • A messy previous reseal
  • Old sealant that looks dirty
  • Gaps by the taps

Questions to ask before you book

  • What aftercare is recommended
  • How the room is protected while they work
  • What prep work is covered
  • How soon you can use it again

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.