Surrey · England

Bath & shower resealing (mastic) in Compton, Surrey

We travel to Compton for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Silicone coming away from the tiles
  • Mould you cannot clean out
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Compton

Do you need bath resealing in Compton?

Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.

The most common problems we’re called about are:

  • Silicone smeared on tiles
  • Black spots in the silicone
  • Damp near the bath
  • Unsealed corners

Comparing quotes

  • Whether cleaning and preparation are in the price
  • What protection goes down before work starts
  • Who turns up on the day
  • What happens if the damage is worse than the photos show

Choosing a repair company

Bath resealing at your home in Compton

A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. We’re often asked to fix sealant that’s split or lifting and black mould in the sealant, in basins & vanity units, shower trays & enclosures and kitchen worktops & sinks.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Location
Compton (GU10, GU9)
Region
Surrey
Warranty
A year, on every repair
Quote
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What a repair cannot fix

Not everything can be repaired, and we would rather say so up front. Repairs will not solve:

  • Very wide gaps that need a trim
  • Hidden water damage
  • Loose tiles, which need refixing first

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Kitchen worktops & sinks
  • Baths
  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures

For landlords and businesses

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, for the same reason.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

How it works

Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes about two hours for a bath, and we finish by cleaning up and talking you through the result.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Have somewhere for us to park nearby if possible
  • Avoid using the area for a few hours before we arrive

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Send pictures for a quote

Read more

What bath resealing costs

We give every job a fixed quote from photos. These are the things that affect it:

  • Any earlier repairs that need removing first
  • Doing more than one item at once
  • The colour and finish to match
  • How easy the damage is to reach

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Getting a price from photos

It only takes a minute to photograph the damage. Please include:

  • A clear, close picture of the problem area
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode
  • Any details about the material

Email us a picture of the damage and a wider shot of the whole item, with your GU10 postcode, and we will reply with a fixed price.

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Questions from Compton

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Do you seal over the old sealant?

All the old sealant comes out. New silicone won’t bond to old.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

What information do you need?

Send pictures through the quote form or call 0345 017 0787.

How much does bath resealing cost in Compton?

Because every job differs, we price from photos. You’ll get a fixed figure before booking.

Will there be a smell?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Aftercare tips

Once the work has cured, treat it gently:

  • Let steam out after showers
  • Give the seal a regular clean
  • Run the extractor fan during and after showers
  • Reseal at the first sign of lifting

Keep the room well ventilated, and dry the joints after bathing to keep mould away.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

Covering Compton

Compton is about 1 mile east of Farnham, in Surrey. Our repair technicians come to clients in Compton, so nothing has to leave your home. We cover all 395 towns and villages across Surrey, from the larger towns to small villages. You can also see our page for London, about 35 miles away.

All of GU10 and GU9 is covered. Streets in the area include Moor Park Lane, Compton Way and Moor Park Way, and we cover them all. If you are just outside Compton, we cover Runfold (1 mile east), The Sands (1 mile east), Badshot Lea (1 mile north), Farnham (1 mile west) and Sandy Cross (1 mile north-east). Within a short drive, we also cover Guildford (9 miles east), Woking (11 miles north-east), Camberley (9 miles north), Frimley (7 miles north), Haslemere (9 miles south) and Cranleigh (13 miles east).

Around Compton

We visit homes around Moor Park, South Farnham School and South Farnham School, among other places. Also close by are St Marys Parish Church (under half a mile west) and Shepherd & Flock pub (0.9 miles north-west). For rail, the closest station is Farnham station, roughly 1.3 miles west. Well-known places in the area include Farnham Castle (1.8 miles west) and Seale and Tongham (1.8 miles east). Not far away are Runfold Wood and Culverswell Hill.

Map of Compton © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.