Dorset · England
Bath Resealing in Corfe Mullen
Bath resealing across Corfe Mullen and nearby, done in a single visit in most cases and guaranteed for a year.
- Mould you can’t clean out
- Silicone smeared on tiles
- Damp near the bath
Bath resealing in Corfe Mullen without replacing anything
Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. Our technicians work on kitchen worktops & sinks, basins & vanity units and wet rooms, and common reasons people get in touch are gaps by the taps and black mould in the sealant.
Big or small, you get the same one-year guarantee in Corfe Mullen and across Dorset.
- Where
- Corfe Mullen (BH21, BH18)
- Area hub
- Dorset
- Cover
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Corfe Mullen
How do I stop mould in sealant?
Damp is the cause. Ventilation and drying keep it clean longer.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How long does a reseal take?
Most reseals take about two hours. Leave it to cure before use.
Can you reseal over the old silicone?
Never over old. The old sealant is cut out and the joint cleaned and dried.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Nearby places to Corfe Mullen
Other services in Corfe Mullen
Why it’s worth resealing in Corfe Mullen
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- No need to remove anything
- One-year guarantee on every repair
Read our full price list.
What your bath or shower is made of matters
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Where we work around Corfe Mullen
Corfe Mullen is about 3 miles south-west of Wimborne Minster, in Dorset. Jobs in Corfe Mullen are booked in like any other job: a fixed price from your photos, then a visit to do the work. Corfe Mullen is one of 462 places in Dorset where we work.
All of BH21 and BH18 is within our area, from the main roads to the quietest streets. Streets in the area include Henbury Rise, Henbury Close and Laurel Close. We also travel to Ashington (1 mile north-east), Beacon Hill (2 miles south-west), Creekmoor (2 miles south), Cowgrove (2 miles north) and Henbury (2 miles north-west). Larger places within reach include Christchurch (12 miles east), Wimborne Minster (3 miles north-east), Blandford Forum (9 miles north-west), Verwood (10 miles north-east), Ferndown (6 miles north-east) and Swanage (11 miles south).
What’s near Corfe Mullen
Locally, our jobs take us to homes close to Pocket Park, Castle Court Preparatory School and St Nicholas. Also close by are Rushcombe First School (less than half a mile south-east) and Corfe Hills School (0.5 miles east). Corfe Mullen’s nearest station is Hamworthy station, about 3.1 miles south. Nearby you’ll also find Dolphin Shopping Centre (3.9 miles south-east) and Alderney Hospital (3.6 miles south-east). Not far away are Ham Common (LNR) and Stoney Down.
How we price bath resealing
Prices are worked out job by job, from your pictures. What matters most is:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- Unusual colours or finishes
- What the surface is made of
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- One picture of the whole bath or shower
- Any details about the material
- Something in shot to show the size
- Whether it’s been repaired or coated before
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
What we are called out for in Corfe Mullen
In time, even good sealant discolours. Steam, soap and movement all wear it down.
It’s worth getting a quote if you see:
- Leaks at the edges
- Stained silicone
- Black spots in the silicone
- An untidy old seal
Questions to ask before booking
- How the colour is matched
- How long the guarantee is and what it covers
- How to look after the finish
- Whether the price is fixed and includes VAT
What happens on the day
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to around two hours, including clearing up.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
When we’d advise against a repair
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Water damage behind the bath that needs a builder
- Gaps too big for silicone alone
- Hollow or loose tiles
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Basins & vanity units
- Baths
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Store bottles on a shelf
- Give the seal a regular clean
- Reseal at the first sign of lifting
- Open a window after bathing
Good ventilation is the best protection, and dry the joints after bathing.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
About our accreditations · Every repair comes with a one-year guarantee.
