Dorset · England

Bath & shower resealing (mastic) in Swanage, Dorset

Our repair technicians come to Swanage for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Damp near the bath
  • Silicone coming away from the tiles
  • Silicone smeared on tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Swanage?

Landlords, agents and businesses in Swanage

We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

About our bath resealing in Swanage

Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, plus curing time. Our technicians work on baths, shower trays & enclosures and kitchen worktops & sinks, and people most often call us about gaps by the taps and black mould in the sealant.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Swanage (BH19)
Area hub
Dorset
Guarantee
One year on every repair
Price
Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Prices and what affects them

We give every job a fixed quote from photos. These are the things that affect it:

  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • Doing more than one item at once

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

Two or three clear photos are generally enough. Try to include:

  • Your postcode, so we can check dates
  • Daylight if possible, and no flash reflection
  • The material, if you know it
  • Details of any past repairs

If you are in Swanage and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes around two hours. If anything looks different from your pictures, we will talk to you before going ahead.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. We make sure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

How to prepare

  • Open a window if you can
  • Let us know about parking or access
  • Clear the area around the damage

How to get a price

Most customers in Swanage get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Advice

What we are called out for in Swanage

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.

These are the problems we are asked about most:

  • Leaks at the edges
  • Gaps in the seal
  • Black mould in the sealant
  • Stained silicone

What your quote should include

  • When it can be used again
  • Whether a trained technician does the job
  • Whether the colour is mixed to match
  • The length of the guarantee and what it covers

Our hiring checklist

Repairs by material

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Swanage: your questions answered

Why does mould come back so fast?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

How long will it take?

Most reseals take about two hours. It then needs time to cure.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you cover Swanage?

Yes, we do. Repair technicians travel to Swanage from across the region, with no extra charge for travel.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

Looking after it afterwards

Good habits make a big difference to how long a repair lasts:

  • Dry the seal after bathing
  • Let steam out after showers
  • Run the extractor fan during and after showers
  • Clean the sealant gently and regularly

Avoid scraping the joints, and keep shampoo bottles off the joints.

Damp below or loose tiles need checking quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.

What a repair can’t fix

It helps to know what we cannot do:

  • Movement in the bath or tray
  • Gaps so wide they need filling or trims before sealing
  • Rotten walls or floors behind the bath

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Baths
  • Wet rooms
  • Basins & vanity units
  • Shower trays & enclosures
  • Kitchen worktops & sinks

Swanage and the surrounding area

Swanage is about 8 miles south of Poole, in Dorset. Wherever you are in the BH19 postcode area, we carry out the work at your property. Swanage is one of 462 towns and villages in Dorset where we work.

Our repair technicians cover all of BH19. That includes homes on Station Road, High Street and Church Hill and the roads around them. You will find Swanage on the A351, which makes it straightforward to reach. We also travel to Herston (1 mile west), Durlston (1 mile south-east), Ulwell (1 mile north), Langton Matravers (2 miles west) and Studland (2 miles north). Further out, we also cover Christchurch (13 miles north-east), Wimborne Minster (13 miles north), Ferndown (14 miles north), Broadstone (11 miles north), Corfe Mullen (11 miles north) and Highcliffe (15 miles north-east).

Around Swanage

Around Swanage, we work in homes near St Mary's Church, The Black Swan Inn and Prince Albert Gardens. You will also find Swanage Primary School (less than half a mile south) and The Swanage School (0.8 miles west). Well-known places in the area include Swanage Museum and Heritage Centre (less than half a mile south-east). Not far away are Nine Barrow Down.

Map of Swanage © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.