Shropshire · England

Bath & shower resealing (mastic) in Cotonwood, Shropshire

Bath resealing in and around Cotonwood: photo quotes, tidy work and a year’s guarantee.

  • Damp near the bath
  • Sealant that’s split or lifting
  • Mould you cannot clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Cotonwood

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

About our bath resealing in Cotonwood

We reseal baths with them filled with water, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Our repair technicians work on basins & vanity units, wet rooms and kitchen worktops & sinks, and the jobs we see most are an untidy old seal and leaks at the edges.

All our work comes with a one-year guarantee.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Cotonwood (SY13)
County
Shropshire
Cover
A year, on every repair
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Your questions about bath resealing in Cotonwood

Will there be a smell?

There can be some smell while we work. It clears as the materials cure.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

What happens next?

We come back with a fixed quote, plus dates. There is no obligation to book.

Do you seal over the old sealant?

Never over old. The old sealant is cut out and the joint cleaned and dried.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Why does my sealant keep going mouldy?

Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.

How to look after the repair

To keep it looking its best for years:

  • Let steam out after showers
  • Keep the joints dry
  • Use the extractor fan
  • Store bottles on a shelf

Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.

Common problems we fix in Cotonwood

Black mould is the most common reason people reseal. It grows into the silicone, so cleaning cannot get it all out.

Common reasons people in Cotonwood contact us include:

  • Leaks at the edges
  • Silicone coming away from the tiles
  • Missing sealant behind the taps
  • A messy previous reseal

What your quote should include

  • A fixed price, and whether VAT is included
  • If travel is included in the price
  • Aftercare advice
  • How changes to the job are handled

Choosing a repair company

Prices and what affects them

We charge the same across the UK, including Cotonwood. The price reflects:

  • How easy the damage is to reach
  • Unusual colours or finishes
  • How many areas need work
  • Doing more than one item at once

A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with nothing added on the day.

Send pictures for a quote

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • A wider photo showing the entire bath or shower
  • Any details about the material
  • A clear, close picture of the problem area
  • Daylight if possible, and no flash reflection

If you are in Cotonwood and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

How the visit works

Arrival times are agreed in advance. On site, it takes a couple of hours for most jobs. The room is left tidy and you’ll know when it can be used.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Let us know about parking or access
  • Tell us about any previous repairs or coatings

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed quote

Read more

Cotonwood and nearby

Cotonwood is about 8 miles west of Market Drayton, in Shropshire. Jobs in Cotonwood are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Cotonwood is one of 433 places in Shropshire we cover. You can also see our page for Liverpool, about 35 miles away.

All of SY13 is within our area. Nearby, we also work in Steel Heath (1 mile north-east), Tilstock (1 mile north-east), Prees Higher Heath (2 miles east), Prees Heath (2 miles north-east) and Heathlane (2 miles north-east). Larger places within reach include Shrewsbury (15 miles south), Oswestry (15 miles west), Market Drayton (8 miles east), Coleham (15 miles south), Kingsland (15 miles south) and Whitchurch (3 miles north).

What’s near Cotonwood

Cotonwood’s nearest station is Prees station, roughly 1.5 miles south. A little further out are Soulton Hall Moat (3.7 miles south) and Whitchurch Community Hospital (3.7 miles north). For a walk, there is Prees Heath Common and Fenns Bank Works Pool 2.

Map of Cotonwood © OpenStreetMap contributors

Why reseal now?

Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why choose Surface Doctor in Cotonwood

  • Fixed prices from your photos
  • We come to you, anywhere in the UK
  • Accredited with CHAS, Constructionline and SafeContractor
  • One price list for the entire UK

See our prices page.

Landlord and trade work in Cotonwood

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

Materials and what they mean for the repair

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.