Shropshire · England
Bath Repair for Cotonwood homes
Problem with your bath in Cotonwood? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Rusty patches near the plughole
How we handle bath repair in Cotonwood
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s scratches you can feel with a fingernail and chips on the rim or sides, we can generally put it right.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Cotonwood (SY13)
- Region
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Cotonwood?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Cotonwood clients choose us
- A year’s guarantee on all work
- A fixed quote before booking
- Normally one visit, start to finish
- No extra charge for your area
Take a look at our prices page and resurfacing vs replacement cost guide.
Landlord and trade work in Cotonwood
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. You can expect it to take a few hours, depending on the damage, and we’ll keep you posted as we go.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the next day.
Preparing for the visit
- Clear the area around the damage
- Let us know about parking or access
- Let us know if it has been repaired before
Ask for a price
To get a price, send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Places near Cotonwood
More services for Cotonwood
Questions from Cotonwood
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Are there extra charges for Cotonwood?
There is no separate call-out charge. Your fixed price includes everything.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you price it without visiting?
Normally, yes. Clear photos let us give you a fixed quote without visiting.
What we’re called out for in Cotonwood
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
People typically call us when they notice something like this:
- Rust by the waste and overflow
- Snagging damage from a refit
- A cracked acrylic bath
- A kit repair that didn’t last
Comparing quotes
- What happens if the damage is worse than the pictures show
- How to look after the finish
- Who turns up on the day
- Whether the price covers travel
Our work in Cotonwood
Cotonwood is about 8 miles west of Market Drayton, in Shropshire. Jobs in Cotonwood are booked in like any other job: a fixed quote from photos, then a visit to do the work. Cotonwood is one of 433 places in Shropshire we cover. We work right across the region, from Cotonwood to Liverpool (35 miles away).
Every address in SY13 is covered, from the main roads to the quietest streets. Nearby, we also work in Steel Heath (1 mile north-east), Tilstock (1 mile north-east), Prees Higher Heath (2 miles east), Prees Heath (2 miles north-east) and Heathlane (2 miles north-east). Within a short drive, we also cover Shrewsbury (15 miles south), Oswestry (15 miles west), Market Drayton (8 miles east), Coleham (15 miles south), Kingsland (15 miles south) and Whitchurch (3 miles north).
Landmarks near Cotonwood
Cotonwood’s nearest station is Prees station, roughly 1.5 miles south of the centre. Nearby you’ll also find Soulton Hall Moat (3.7 miles south) and Whitchurch Community Hospital (3.7 miles north). The countryside around Cotonwood includes Prees Heath Common and Fenns Bank Works Pool 2.
Prices and what affects them
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- What the surface is made of
- The size and number of damaged areas
- What kind of damage it is
- Access to the area
Our prices are the same across the UK, so there is no premium for Cotonwood. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- A photo taken from further back
- Whether it’s been repaired or coated before
- Something in shot to show the size
- Your postcode, so we can check dates
Most customers in Cotonwood get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- If an acrylic bath flexes, have its feet adjusted
- Keep metal cans and razors off the surface
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
