Aberdeen · Scotland

Bath Resealing in Cove Bay

Bath resealing in and around Cove Bay: photo quotes, tidy work and a year’s guarantee.

  • Missing sealant behind the taps
  • Stained silicone
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Cove Bay homes

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Clean the sealant gently and regularly
  • Replace the seal when mould sets in
  • Let steam out after showers
  • Wipe the joints dry after use

Let it cure fully before using the bath or shower, normally about a day.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Bath resealing in Cove Bay without replacing anything

The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. If you’re dealing with silicone smeared on tiles and silicone coming away from the tiles, we can typically put it right, whatever the material.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Cove Bay (AB12, AB99, AB10)
County
Aberdeen
Guarantee
One year on every repair
Quotes
Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

When we’d advise against a repair

A repair isn’t always the answer, and we will tell you before we start. We can’t fix:

  • Loose tiles, which need refixing first
  • A flexing bath
  • Rotten walls or floors behind the bath

If in doubt, send pictures and we will say what we think before you book.

Materials we repair

  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Wet rooms
  • Basins & vanity units
  • Baths

Work for landlords and builders

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Why reseal now?

Resealing costs very little. Failed sealant can lead to water damage that is much more expensive. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

Why us?

  • Most jobs done in one visit
  • We’ll tell you if it’s not worth repairing
  • A year’s guarantee on all work
  • Dust sheets down, tidy finish

Take a look at our full price list.

Where we work around Cove Bay

Cove Bay is about 4 miles south of Aberdeen, in Aberdeen. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Cove Bay is one of 63 places in Aberdeen where we work.

We work across AB12, AB99 and AB10. Local streets include Dunlin Road, Loirston Road and Langdykes Road, all of which we cover. Neighbouring places we cover include Altens (1 mile north), Tullos (1 mile north), Balnagask (2 miles north), Torry (2 miles north) and Footdee (3 miles north). We also work in nearby towns such as Aberdeen (4 miles north), Rosemount (3 miles north), Berryden (4 miles north), Dyce (8 miles north-west), Tillydrone (5 miles north) and Queen's Cross (3 miles north-west).

Landmarks near Cove Bay

Around Cove Bay, we work in homes near Duthie Park, St Mary's Church and Lochside Academy. The closest station to Cove Bay is Aberdeen station, about 2.6 miles north of the centre. Well-known places in the area include Tolbooth Museum (3 miles north) and Union Square Aberdeen (2.7 miles north). Open spaces near Cove Bay include Kincorth Hill and Loirston Loch.

Map of Cove Bay © OpenStreetMap contributors

What your bath or shower is made of matters

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Shower trays

Trays are sealed with weight on them, for the same reason.

FAQs for Cove Bay

Is a repair better than a new one?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

It’s been repaired before. Can you still fix it?

Typically, yes. The old repair comes out first, so mention it when you send pictures.

Do you work in Cove Bay?

Yes. We work across the UK and travel to Cove Bay. Send us pictures for a fixed quote, or call 0345 017 0787.

How soon can you come?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

How long does a reseal take?

Around two hours for a bath, plus curing time.

Why does the silicone keep cracking?

Movement is the usual cause. We seal baths full of water.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What happens on the day

There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a couple of hours, tidy-up included.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Mention if the room is upstairs or in a flat
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Send us a photo of the damage and one of the whole item, with your AB12 postcode, and we will come back with a fixed quote.

Get a fixed price

Read more

What we are called out for in Cove Bay

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.

Typical reasons for a call-out include:

  • Unsealed corners
  • Old sealant that looks dirty
  • Black spots in the silicone
  • Damp near the bath

Comparing quotes

  • How the room is protected while they work
  • What prep work is covered
  • How soon you can use it again
  • How the colour is matched

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.