Essex · England

Bath Resealing in Craig's End

Bath, shower and sink resealing with new mould-resistant silicone at your home in Craig's End, with a one-year guarantee on every repair.

  • Leaks at the edges
  • Black mould in the sealant
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Craig's End

Covering Craig's End

Craig's End is about 6 miles south-east of Haverhill, in Essex. Across the CO9 area, we come to you. Craig's End is one of 644 towns and villages in Essex we cover. Our jobs stretch from Craig's End to London (about 43 miles away).

Postcode districts we cover here: CO9. Close by, we cover Stambourne Green (1 mile north-west), Cornish Hall End (2 miles west), Birdbrook (2 miles north), Steeple Bumpstead (3 miles north-west) and New England (3 miles north). Within a short drive, we also cover Braintree (9 miles south), Saffron Walden (11 miles west), Halstead (8 miles south-east), Great Dunmow (11 miles south-west), Stansted Mountfitchet (15 miles south-west) and Great Notley (10 miles south).

What’s near Craig's End

Locally, our jobs take us to homes close to Parish Church of St Peter and St Thomas and The Red Lion Public House, among other places. A little further out are Toppesfield Museum of The Working Horse (1.5 miles east) and Bumpstead Rural District (2.9 miles north-west).

Map of Craig's End © OpenStreetMap contributors

How we handle bath resealing in Craig's End

Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. Common call-outs are for silicone coming away from the tiles and gaps by the taps, on kitchen worktops & sinks, basins & vanity units and wet rooms.

You get a one-year guarantee, the same in Craig's End as everywhere else we work.

Technician in a mask working on a freestanding roll-top bath
Location
Craig's End (CO9)
Region
Essex
Guarantee
One year on every repair
Quote
Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

How the visit works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a couple of hours. If anything looks different from your pictures, we will talk to you before going ahead.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Keep a parking space free if you can
  • Tell us about any previous repairs or coatings
  • Open a window if you can

Ask for a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Advice

Materials and what they mean for the repair

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, for the same reason.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

Is resealing worth it?

A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

What you get with us

  • Rooms protected and left tidy
  • Same prices wherever you are
  • Nothing taken out or refitted
  • Technicians who travel to you, UK-wide

See our full price list.

Craig's End: your questions answered

Do you come to Craig's End?

Yes. We work across the UK and travel to Craig's End. Send us pictures for a fixed quote, or call 0345 017 0787.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Do you seal over the old sealant?

No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.

Do you cover the entire of Essex?

We work UK-wide, so Craig's End is covered. Our prices are the same everywhere.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.

Why does my sealant keep splitting?

Usually because the bath or tray moves. We seal baths full of water.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before.

Landlord and trade work in Craig's End

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

When to call us in Craig's End

Even good sealant eventually discolours. Steam, soap and movement all wear it down.

It’s worth getting a quote if you see:

  • Leaks at the edges
  • Mould you can’t clean out
  • Discoloured, yellow sealant
  • A messy previous reseal

What your quote should include

  • How your room will be protected
  • Whether a trained technician does the job
  • What preparation is included
  • How to care for the finish

Our hiring checklist

What we can’t put right

Some jobs aren’t right for a repair, for example:

  • Gaps too big for silicone alone
  • Hidden water damage
  • A flexing bath

Send us pictures and we will tell you honestly before booking.

Materials we work on in Craig's End

  • Kitchen worktops & sinks
  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms

Keeping it looking good

So the finish stays in good condition:

  • Clean the sealant gently and regularly
  • Let steam out after showers
  • Ventilate the bathroom well
  • Do not stand toiletries on the seal

Keep the room well ventilated, and dry the joints after bathing.

Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.