Fife · Scotland
Bath & shower resealing (mastic) in Crossford, Fife
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Crossford and across Fife. Free, fixed quotes from your photos.
- Sealant that is split or lifting
- Leaks at the edges
- Stained silicone
Bath resealing at your home in Crossford
A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. Typical jobs include gaps by the taps and an untidy old seal, in baths, wet rooms and kitchen worktops & sinks.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Crossford (KY12)
- County
- Fife
- Cover
- One year on every repair
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Why it’s worth resealing in Crossford
Putting new silicone over old does not last. It soon peels, and mould stays trapped behind it. We remove the old sealant completely. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Crossford clients choose us
- One visit for most repairs
- One price list for the entire UK
- A year’s guarantee on all work
- Nothing taken out or refitted
Take a look at our full price list.
What happens on the day
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It generally takes about two hours for a bath, and you can get on with other things while we’re there.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
Preparing for the visit
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
About Crossford
Crossford is about 3 miles west of Dunfermline, in Fife. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Our repair technicians cover all 133 towns and villages across Fife, from the larger towns to small villages. Our nearest city page is Edinburgh, about 14 miles away.
Our repair technicians cover all of the KY12 postcode area. We regularly work on streets such as Main Street, Meadow View and Pitfirane Park. We also cover the places around Crossford: Wellwood (2 miles north-east), Limekilns (2 miles south), Dunfermline (3 miles east), Pitreavie (3 miles east) and Townhill (3 miles north-east). Further out, we also cover Kirkcaldy (14 miles east), Glenrothes (15 miles north-east), Cowdenbeath (6 miles north-east), Dysart (15 miles east), Dalgety Bay (6 miles east) and Rosyth (3 miles south-east).
Landmarks near Crossford
Around Crossford, we work in homes near Pittencrieff Park, Cairneyhill Church and Queen Anne High School Dunfermline. For rail, the closest station is Dunfermline City station, roughly 1.8 miles east. A little further out are Kingsgate Centre (1.6 miles north-east) and Pitfirrane Castle (within half a mile south-west). For a walk, there is Black Loch.
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Baths
Baths are resealed with water in them, to open the joint fully.
How to care for the repair
To keep it looking its best for years:
- Dry the seal after bathing
- Air the room after use
- Use the extractor fan
- Replace the seal when mould sets in
Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. It may be more than a reseal, and we will say if you need a builder or plumber.
Also in Crossford
What we are called out for in Crossford
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.
These are the problems we are asked about most:
- Water getting behind the bath or tray
- Black spots in the silicone
- Unsealed corners
- A messy previous reseal
Questions to ask before booking
- How changes to the job are handled
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- How soon you can use it again
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Crossford use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What a repair can’t fix
We will always be straight with you, so here’s what a repair will not do:
- Gaps so wide they need filling or trims before sealing
- Movement in the bath or tray
- Hidden water damage
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
FAQs for Crossford
Why does the silicone keep cracking?
Something is moving. Persistent splitting can mean the support needs attention.
Why does mould come back so fast?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
What happens after I send photos?
We come back with a fixed quote, plus dates. You’re under no obligation.
Do you seal over the old sealant?
Never over old. It’s removed, cleaned off and the joint dried first.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
About our accreditations · Every repair comes with a one-year guarantee.
