Powys · Wales

Bath & shower resealing (mastic) in Crossway, Powys

Local bath resealing for Crossway: photo quotes, tidy work and a year’s guarantee.

  • Discoloured, yellow sealant
  • An untidy old seal
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Crossway

Bath resealing in Crossway, done in place

Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. Whether it’s damp near the bath and an untidy old seal, we can help, whatever the material.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Location
Crossway (LD1)
Area hub
Powys
Guarantee
One year on every repair
Price
Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Crossway questions

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

When can I use the bath after resealing?

Typically after around 24 hours. We’ll tell you the exact time.

Is there a call-out fee?

There’s no separate call-out charge. The fixed price covers the visit and the work.

How much does bath resealing cost in Crossway?

Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

How do I book?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

How long does resealing take?

Generally a couple of hours, plus curing time.

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

How to care for the repair

How the surface is treated afterwards matters. Here’s what we suggest:

  • Keep bottles off the joints
  • Clean the sealant gently and regularly
  • Wipe the joints dry after use
  • Open a window after bathing

Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

Crossway and nearby

Crossway is about 21 miles south of Y Drenewydd, in Powys. Our technicians come to clients in Crossway and the surrounding area, so there is no workshop to go to. We cover all 234 towns and villages across Powys, from the larger towns to small villages. You can also see our page for Birmingham, about 66 miles away.

Our technicians cover all of the LD1 postcode area and the streets around it. If you are just outside Crossway, we cover Hawy (1 mile north), Llandrindod Wells (2 miles north), Gwystre (5 miles north), Llanbadarn Fawr (5 miles north-east) and Crossgates (5 miles north-east). Larger places within reach include Llanfair-ym-Muallt (4 miles south), Rhayader (8 miles north-west), Llanelwedd (4 miles south) and Llanwrtyd Wells (13 miles south-west).

Landmarks near Crossway

In Crossway, that means homes near Llandrindod High School, St David's Church and Drovers Arms and the streets around them. The nearest railway station is Llandrindod station, about 2.3 miles north. A little further out are Disserth and Trecoed (0.9 miles west) and Llandrindod Wells Memorial Hospital (2.4 miles north). Open spaces near Crossway include Pentrosta Mire and Poultry Farm Hill.

Map of Crossway © OpenStreetMap contributors

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

Why it’s worth resealing in Crossway

Sealing over old silicone is a false economy. It soon peels, and mould stays trapped behind it. We remove the old sealant completely. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Why Crossway customers choose us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Fixed prices from your photos
  • We will tell you if it’s not worth repairing
  • Nothing taken out or refitted

Take a look at our pricing.

How the visit works

Arrival times are agreed in advance, so you know when to expect us. On site, it takes about two hours for a bath. The room is left tidy and ready to use once it has cured.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Preparing for the visit

  • Let us know about parking or access
  • Mention any earlier repairs or resurfacing
  • Move bottles, mats and clutter away from the area

How to get a price

To get a price, send two or three pictures through our quote form or ring us. We will say straight away if a repair is the right fix.

Get a free quote

Related advice

How we price bath resealing

You will know the full cost before you book. We take into account:

  • The material and finish
  • Previous DIY repairs that have to come out
  • Doing more than one item at once
  • How much damage there is

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.

Send pictures for a quote

When you take your pictures, these tips help us give you a firm price:

  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • Where you are, by postcode
  • A clear, close picture of the problem area

If you are in Crossway and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Honest limits

To be straight with you, some problems need a different fix:

  • Water damage behind the bath that needs a builder
  • A bath or tray that moves, until its support is fixed
  • Gaps so wide they need filling or trims before sealing

If in doubt, send photos and we’ll say what we think before booking.

Materials we work on in Crossway

  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths

For landlords and businesses

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Signs you need bath resealing in Crossway

Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.

It’s worth getting a quote if you see:

  • Gaps by the taps
  • Silicone coming away from the tiles
  • A messy previous reseal
  • Damp near the bath

Before booking anyone

  • Who turns up on the day
  • Whether the colour is mixed to match
  • How changes to the job are handled
  • How your room will be protected

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.