Somerset · England

Bath Resealing in Crowcombe

Our repair technicians come to Crowcombe for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Discoloured, yellow sealant
  • Damp near the bath
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Crowcombe?

How we handle bath resealing in Crowcombe

A fresh seal protects your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. Whether it’s old sealant that looks dirty and damp near the bath, we can typically put it right.

Your repair is guaranteed for a year, as with every job we do.

Where
Crowcombe (TA4)
Area hub
Somerset
Guarantee
12 months on all our work
Quotes
Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Common questions in Crowcombe

Can new silicone go over old?

All the old sealant comes out. Fresh silicone does not stick to old.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.

Do you cover the whole of Somerset?

Everywhere in the UK, Crowcombe included. Travel is included in the price.

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before and we’ll plan for it.

How do I stop mould in sealant?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

How long does a reseal take?

A bath or shower usually takes a couple of hours. Leave it to cure before use.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Crowcombe and the surrounding area

Crowcombe is about 9 miles north-west of Taunton, in Somerset. Customers in Crowcombe get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in all 640 towns and villages across Somerset.

Our repair technicians cover all of TA4 and the streets around it. Other places close to Crowcombe include Lawford (1 mile west), Flaxpool (1 mile south), Lower Halsway (1 mile north-west), Higher Halsway (1 mile north-west) and Crowcombe Heathfield (1 mile south). Within a short drive, we also cover Taunton (9 miles south-east), Bridgwater (10 miles east), Minehead (12 miles north-west), Burnham-on-Sea (13 miles north-east), Wellington (10 miles south) and Sydenham (11 miles east).

Around Crowcombe

Around Crowcombe, we work in homes near Church of the Holy Ghost, The Carew Arms And Attached Outbuilding and Crowcombe CofE VA Primary School. Further afield, we also cover the area around Blazes (3.9 miles south). For a walk, there is Wills Neck.

Map of Crowcombe © OpenStreetMap contributors

Looking after it afterwards

It’s all simple stuff, just a few sensible habits:

  • Keep bottles off the joints
  • Keep the joints dry
  • Open a window after bathing
  • Replace the seal when mould sets in

Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

We carry out planned and one-off repairs for housing associations and facilities teams in Somerset and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, for the same reason.

What we can’t put right

Not everything can be repaired, and we’d rather say so up front. We cannot fix:

  • Gaps so wide they need filling or trims before sealing
  • A flexing bath
  • Loose tiles, which need refixing first

Send us photos and we will tell you honestly.

Materials we work on in Crowcombe

  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Shower trays & enclosures

Can I fix it myself?

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Prices and what affects them

We don’t charge extra for travel to Crowcombe. The price comes down to:

  • Any earlier repairs that need removing first
  • Whether we combine several jobs
  • Access to the area
  • The material

Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from photos

A couple of clear pictures is all it takes. It helps if you send:

  • What it’s made of, if you know
  • Where you are, by postcode
  • Details of any past repairs
  • One picture of the whole bath or shower

Most clients in Crowcombe get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

How the visit works

There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a couple of hours, including clearing up.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Open a window if you can
  • Tell us about parking, stairs or access

Getting a price

For a price in Crowcombe, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Read more

Do you need bath resealing in Crowcombe?

No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.

Typical reasons for a call-out include:

  • Discoloured, yellow sealant
  • Silicone coming away from the tiles
  • Missing sealant behind the taps
  • Silicone smeared on tiles

Questions to ask before booking

  • Who will actually do the work
  • What the guarantee covers, and for how long
  • When it can be used again
  • Whether they match the colour on site

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.