Somerset · England
Bath Repair for Crowcombe homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Crowcombe. Send pictures for a free, fixed quote.
- Repairs from £95
- A kit repair that didn’t last
- Chips under the taps
Bath repair at your home in Crowcombe
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Common call-outs are for a cracked acrylic bath and holes from dropped items, in roll-top & freestanding, whirlpool & spa baths and pressed steel enamel.
You get a one-year guarantee, the same in Crowcombe as everywhere else we work.
- Where
- Crowcombe (TA4)
- Area hub
- Somerset
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
What we’re called out for in Crowcombe
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal lets water in, and rust follows.
Clients normally contact us about:
- A kit repair that didn’t last
- Scuffs and scratches in the surface
- Chips along the edge of the bath
- Impact holes in acrylic
What to look for in a quote
- Who turns up on the day
- How your room will be protected
- A fixed price, and whether VAT is included
- What happens if they find more damage
Crowcombe questions
How long does the repair take to cure?
Usually within a day, depending on the repair.
Do you cover Crowcombe?
We do. Repair technicians travel to Crowcombe from across the region, and the price is the same as everywhere else.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you cover the whole of Somerset?
Everywhere in the UK, Crowcombe included. There’s no extra charge for travel.
I tried a repair kit. Can you fix it?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Can you repair something that is been repaired before?
Usually, yes. The old repair comes out first, so let us know about it.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
What does bath repair cost?
Prices start from £95. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Crowcombe and nearby
Crowcombe is about 9 miles north-west of Taunton, in Somerset. We visit homes and businesses in Crowcombe and the surrounding area, so you do not need to take anything anywhere. Crowcombe is one of 640 places in Somerset we cover.
Our technicians cover all of the TA4 postcode area. Neighbouring places we cover include Lawford (1 mile west), Flaxpool (1 mile south), Lower Halsway (1 mile north-west), Higher Halsway (1 mile north-west) and Crowcombe Heathfield (1 mile south). Larger places within reach include Taunton (9 miles south-east), Bridgwater (10 miles east), Minehead (12 miles north-west), Burnham-on-Sea (13 miles north-east), Wellington (10 miles south) and Sydenham (11 miles east).
Near you in Crowcombe
Typical jobs here are in homes near Church of the Holy Ghost, The Carew Arms And Attached Outbuilding and Crowcombe CofE VA Primary School. Well-known places in the area include Blazes (3.9 miles south). Green spaces nearby include Wills Neck.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What affects the price in Crowcombe
Repairs from £95. We price every job individually. The main factors are:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- Doing more than one item at once
- The size and number of damaged areas
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
You can take the pictures on your phone. Make sure they show:
- One picture of the entire bath
- Something in shot to show the size
- Any details about the material
- One sharp close-up of the damage
Send us pictures of the damage and one of the whole item, with your TA4 postcode, and we will reply with a fixed price.
Other services in Crowcombe
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on the damage, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Ask for a price
If you are in Crowcombe and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
Should you replace it?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- We’ll tell you if it’s not worth repairing
- A fixed quote before you book
- Colour-matched on site
- No extra charge for your area
See our full price list or guide to resurfacing and replacement costs.
What we cannot put right
Some jobs are not right for a repair, including:
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
How to care for the repair
After the repair has cured, a few habits help it last:
- Put a towel in the bath if you are working above it
- Clean with warm water and a mild detergent
- Rinse the bath after use, especially in hard water areas
- A dripping tap stains enamel, so fix it early
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
