Fife · Scotland
Bath & shower resealing (mastic) in Culross, Fife
We travel to Culross for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Black spots in the silicone
- Gaps in the seal
- Silicone smeared on tiles
When a repair is not the answer
We’d rather lose a job than do one that won’t last, so these are the limits:
- A flexing bath
- Rotten walls or floors behind the bath
- Loose tiles, which need refixing first
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Culross
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
Bath resealing at your home in Culross
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Our technicians work on kitchen worktops & sinks, shower trays & enclosures and baths, and common reasons people get in touch are a messy previous reseal and gaps by the taps.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Culross (KY12)
- County
- Fife
- Guarantee
- One year on every repair
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Culross
Other services in Culross
Looking after it afterwards
To keep it looking its best for years:
- Open a window after bathing
- Ventilate the bathroom well
- Clean the sealant gently and regularly
- Keep the joints dry
Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. It may be more than a reseal, and we will say if you need a builder or plumber.
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Baths
Baths are resealed with water in them, to open the joint fully.
Resealing in Culross: why it matters
Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Dust sheets down, tidy finish
- One price list for the entire UK
- Nothing taken out or refitted
- Technicians who travel to you, UK-wide
Read our prices page.
Common questions in Culross
How long before I can shower?
You will get the curing time from us, normally around a day.
Do you come to Culross?
Yes. We work across the UK and travel to Culross. Send us photos for a fixed quote, or call 0345 017 0787.
Can you quote from pictures?
Nearly always. If pictures don’t show enough, we will ask for another angle.
What happens next?
You will get a fixed quote back, plus dates. You’re under no obligation.
What does bath resealing cost?
Because every job differs, we price from photos. You know the full cost before anything is booked.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you reseal over the old silicone?
All the old sealant comes out. New silicone will not bond to old.
What affects the price in Culross
There is no charge for travel to Culross. The price comes down to:
- How many items we do on one visit
- Where the damage is and how we get to it
- How many areas need work
- Unusual colours or finishes
Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
You can take the pictures on your phone. Make sure they show:
- Whether it’s been repaired or coated before
- The material, if you know it
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take around two hours. We clean up when we’re done and let you know when you can use it again.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Getting a price
To get a price, send two or three pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
Related advice
When to call us in Culross
Even good sealant eventually discolours. Steam, soap and movement all wear it down.
Typical reasons for a call-out include:
- Damp near the bath
- Gaps by the taps
- Discoloured, yellow sealant
- Black spots in the silicone
What to look for in a quote
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- When it can be used again
- Aftercare advice
Culross and the surrounding area
Culross is about 3 miles north of Bo'ness, in Fife. From the centre of Culross to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 133 towns and villages in Fife. You can also see our page for Edinburgh, about 18 miles away.
Postcode districts we cover here: KY12. You’ll find streets such as Tanhouse Brae, Little Causeway and Barbara Stocks Lane. Nearby, we also work in Low Valleyfield (1 mile east), High Valleyfield (1 mile north-east), Low Torry (2 miles east), Newmills (2 miles east) and Torryburn (2 miles east). Within a short drive, we also cover Dunfermline (8 miles east), Cowdenbeath (11 miles east), Dalgety Bay (11 miles east), Rosyth (8 miles east), Abbeyview (8 miles east) and Lochgelly (13 miles east).
Local landmarks in Culross
Around Culross, we work in homes near Red Lion Inn and Cunninghame House and the streets around them. Other landmarks nearby include Bo'ness Hospital (3.1 miles south) and Dunimarle Museum (0.6 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
