Neath Port Talbot · Wales
Bath & shower resealing (mastic) in Cwrt-sart, Neath Port Talbot
Fixed-price bath resealing in Cwrt-sart and the surrounding area, done in a single visit in most cases.
- An untidy old seal
- Water getting behind the bath or tray
- Mould you can’t clean out
How we handle bath resealing in Cwrt-sart
The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why many DIY jobs peel. We regularly repair wet rooms, basins & vanity units and kitchen worktops & sinks, and common reasons people get in touch are discoloured, yellow sealant and damp near the bath.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Cwrt-sart (SA11)
- County
- Neath Port Talbot
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Cwrt-sart
For anyone letting property in or around Cwrt-sart, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Reseal when black spots won’t clean off
- Do not stand toiletries on the seal
- Wipe the joints dry after use
- Clean the joints with a mild cleaner
Avoid scraping the joints, and do not stand bottles on the seal.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.
What a repair can’t fix
It helps to know what we can’t do too:
- Gaps so wide they need filling or trims before sealing
- Movement in the bath or tray
- Rotten walls or floors behind the bath
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
- Wet rooms
Nearby places to Cwrt-sart
Also in Cwrt-sart
Where we work around Cwrt-sart
Cwrt-sart is about 1 mile south of Neath, in Neath Port Talbot. Whether you are in the middle of Cwrt-sart or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 100 towns and villages in Neath Port Talbot, from the larger towns to small villages.
All of SA11 is covered. We regularly work on streets such as Old Road, Farm Road and Tyla Road and the roads around them. Close by, we cover Ynysymaerdy (1 mile east), Penrhiwtyn (1 mile north), Briton Ferry (1 mile south-west), Pencaerau (1 mile north) and Mount Pleasant (1 mile north-east). Further out, we also cover Port Talbot (3 miles south), Sandfields (3 miles south), Baglan Moors (3 miles south), Sandfields West (3 miles south), Sandfields East (4 miles south) and Pontardawe (6 miles north).
What’s near Cwrt-sart
Our clients here include homes close to Ysgol Carreg Hir, Dwr-y-Felin Comprehensive School and Church of St Clement and the streets around them. Cwrt-sart has its own railway station: Briton Ferry station. Well-known places in the area include Aberafan Centre (3.4 miles south) and Neath Museum (1.5 miles north). The countryside around Cwrt-sart includes Pen Tyla Morris and Gnoll Estate Country Park lake 1.
- Local facilities include Pelenna (2.6 miles east)
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, for the same reason.
Baths
We fill the bath before sealing, to open the joint fully.
Resealing in Cwrt-sart: why it matters
Putting new silicone over old does not last. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
- Most jobs done in one visit
- Honest advice, even when it means no job
Take a look at our full price list.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Common problems we fix in Cwrt-sart
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.
The things customers typically mention when they call include:
- Damp near the bath
- Sealant that’s split or lifting
- Black mould in the sealant
- A messy previous reseal
What your quote should include
- What happens if they find more damage
- Aftercare advice
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
Your questions about bath resealing in Cwrt-sart
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you come to Cwrt-sart?
Yes, we do. Repair technicians travel to Cwrt-sart from across the region, with no extra charge for travel.
Why does my sealant keep splitting?
Normally because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How do I get a price for bath resealing in Cwrt-sart?
We give a fixed quote from your photos. Send a close-up and a picture of the whole item with your SA11 postcode.
Do you cover the entire of Neath Port Talbot?
All of Neath Port Talbot, and the rest of the UK. Travel is included in the price.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a couple of hours. We clean up when we’re done and tell you when it’s ready to use.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Point us to the nearest place to park
- Let us know which floor the room is on
- Let us know if it has been repaired before
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
