Neath Port Talbot · Wales
Bath chip & crack repair in Cwrt-sart, Neath Port Talbot
Problem with your bath in Cwrt-sart? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Snagging damage from a refit
- A chip where the taps sit
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Cover the bath during DIY or decorating
- Do not leave razors or cans standing in the bath
- Have new chips seen to early
- Get a dripping tap fixed promptly
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Bath repair in Cwrt-sart, done in place
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We’re frequently asked to fix chips caused by builders and holes from dropped items, in pressed steel enamel, acrylic and whirlpool & spa baths.
All our work comes with our one-year guarantee, wherever you are in Neath Port Talbot.
- Location
- Cwrt-sart (SA11)
- County
- Neath Port Talbot
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Cwrt-sart
Also in Cwrt-sart
Where we work around Cwrt-sart
Cwrt-sart is about 1 mile south of Neath, in Neath Port Talbot. We travel to homes and businesses in Cwrt-sart and nearby villages, so you do not need to take anything anywhere. Cwrt-sart is one of 100 towns and villages in Neath Port Talbot we cover.
Every address in SA11 is within our area, from the main roads to the quietest streets. Whether you live on Old Road, Farm Road and Tyla Road or anywhere nearby, we can come to you. We also cover the places around Cwrt-sart: Ynysymaerdy (1 mile east), Penrhiwtyn (1 mile north), Briton Ferry (1 mile south-west), Pencaerau (1 mile north) and Mount Pleasant (1 mile north-east). Within a short drive, we also cover Port Talbot (3 miles south), Sandfields (3 miles south), Baglan Moors (3 miles south), Sandfields West (3 miles south), Sandfields East (4 miles south) and Pontardawe (6 miles north).
Local landmarks in Cwrt-sart
Around Cwrt-sart, we work in homes near Ysgol Carreg Hir, Dwr-y-Felin Comprehensive School and Church of St Clement. There’s a railway station in Cwrt-sart itself: Briton Ferry station. Nearby you will also find Aberafan Centre (3.4 miles south) and Neath Museum (1.5 miles north). Green spaces nearby include Pen Tyla Morris and Gnoll Estate Country Park lake 1.
- Other local spots include Pelenna (2.6 miles east)
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Repairing versus replacing in Cwrt-sart
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- A year’s guarantee on all work
- No need to remove anything
- Same prices wherever you are
- Free fixed quotes from pictures
Read our prices page and guide to resurfacing and replacement costs.
What a repair cannot fix
A repair is not right for every job, for example:
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Signs you need bath repair in Cwrt-sart
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
The most common problems we are called about are:
- A chip where the taps sit
- Deep scratches in acrylic
- Cracks in an acrylic bath
- A chipped rim or side
What your quote should include
- How to look after the finish
- What preparation is included
- What happens if they find more damage
- What protection goes down before work starts
FAQs for Cwrt-sart
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
What areas do you cover?
The entire UK, including all of Neath Port Talbot. Send your postcode with your pictures and we will confirm dates.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Do you cover Cwrt-sart?
Yes, we do. We send a technician to Cwrt-sart for every job, and the price is the same as everywhere else.
How the visit works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
Get a quote
Email us photos of the damage and a wider shot of the entire item, and tell us you are in Cwrt-sart, and we’ll reply with a fixed quote.
Advice
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
