Essex · England

Bath Resealing in Dengie

Bath, shower and sink resealing with new mould-resistant silicone at your home in Dengie, with a one-year guarantee on every repair.

  • Water getting behind the bath or tray
  • Sealant that is split or lifting
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Dengie?

Dengie: your questions answered

Why does my sealant keep splitting?

Something is moving. Persistent splitting can mean the support needs attention.

Which areas do you work in?

The whole UK, including all of Essex. Send your postcode with your photos and we will offer you dates.

Is it worth repairing rather than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Dengie.

Is my repair covered?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote and the next dates we have.

How do I stop mould in sealant?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can new silicone go over old?

All the old sealant comes out. New silicone will not bond to old.

Bath resealing in Dengie without replacing anything

Resealing is quick, but it transforms the look. Fresh joints make the whole room look cleaner, and they protect the walls and floor. Our technicians work on baths, kitchen worktops & sinks and wet rooms, and common reasons people contact us are old sealant that looks dirty and silicone smeared on tiles.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Area
Dengie (CM0)
Area hub
Essex
Guarantee
A year, on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

What happens on the day

We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes around two hours in most cases. The room is left tidy and ready to use once it has cured.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

How to prepare

  • Tell us about any previous repairs or coatings
  • Mention any parking restrictions or tricky access
  • Clear the area around the damage

How to get a price

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Get a free quote

Read more

Different materials, different repairs

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Why reseal now?

Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. A repair is priced on what needs doing, not where you live. You will see the full price before you book.

Why Dengie customers choose us

  • Free fixed quotes from pictures
  • Same prices wherever you are
  • Honest advice, even when it means no job
  • Accredited with CHAS, Constructionline and SafeContractor

See our full price list.

Common problems we fix in Dengie

Poor ventilation speeds things up: damp hangs around, and mould takes hold.

If you can see any of these, send us a photo:

  • Black mould in the sealant
  • Silicone smeared on tiles
  • Silicone coming away from the tiles
  • Leaks at the edges

What your quote should include

  • What aftercare is recommended
  • Whether the price covers travel
  • How long the guarantee is and what it covers
  • What protection goes down before work starts

Our hiring checklist

Where we work around Dengie

Dengie is about 4 miles north-east of Burnham-on-Crouch, in Essex. Customers in Dengie get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Dengie is one of 644 places in Essex where we work. Our jobs stretch from Dengie to London (43 miles away).

We cover every part of the CM0 postcode area and the streets around it. Jobs here include addresses on Hall Road and Manor Road. If you’re just outside Dengie, we cover Asheldham (1 mile west), Tillingham (1 mile north), Southminster (2 miles south-west), Steeple (3 miles west) and Stoneyhills (3 miles south-west). Further out, we also cover Colchester (15 miles north), Clacton-on-Sea (15 miles north-east), Maldon (9 miles north-west), Rayleigh (13 miles south-west), Witham (13 miles north-west) and Rochford (10 miles south-west).

Near you in Dengie

Typical jobs here are in homes near Church of St James. For rail, the closest station is Southminster station, roughly 2 miles south-west. The countryside around Dengie includes Dengie SPA.

Map of Dengie © OpenStreetMap contributors

Prices and what affects them

There’s no area surcharge for Dengie. The price reflects:

  • The type of damage
  • Doing more than one item at once
  • What the surface is made of
  • How much damage there is

Our prices are the same across the UK, so there is no premium for Dengie. The job itself decides the price: the material, the amount of damage and how many items.

Send pictures for a quote

Good photos mean an accurate price. Here’s what helps:

  • A clear, close picture of the problem area
  • Any details about the material
  • Details of any past repairs
  • A picture taken from further back

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

When a repair isn’t the answer

We will always be straight with you, so here’s what a repair will not do:

  • A bath or tray that moves, until its support is fixed
  • Gaps so wide they need filling or trims before sealing
  • Hidden water damage

If in doubt, send photos and we will say what we think.

Materials we repair

  • Basins & vanity units
  • Baths
  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.