Essex · England
Bath re-enamelling & resurfacing in Dengie, Essex
Fixed-price bath re-enamelling in Dengie and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
Covering Dengie
Dengie is about 4 miles north-east of Burnham-on-Crouch, in Essex. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Our repair technicians cover 644 places across Essex, from the larger towns to small villages. You can also see our page for London, about 43 miles away.
Here we cover the CM0 postcode area. Jobs here include addresses on Hall Road and Manor Road. Neighbouring places we cover include Asheldham (1 mile west), Tillingham (1 mile north), Southminster (2 miles south-west), Steeple (3 miles west) and Stoneyhills (3 miles south-west). Within a short drive, we also cover Colchester (15 miles north), Clacton-on-Sea (15 miles north-east), Maldon (9 miles north-west), Rayleigh (13 miles south-west), Witham (13 miles north-west) and Rochford (10 miles south-west).
What’s near Dengie
Around Dengie, we work in homes near Church of St James. For rail, the closest station is Southminster station, about 2 miles south-west of the centre. The countryside around Dengie includes Dengie SPA.
Bath re-enamelling at your home in Dengie
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s thin, worn enamel in places and several chips and rust patches, we can normally put it right, on basins & shower trays, acrylic baths and cast iron baths alike.
Whatever the size of the job, you get the same one-year guarantee in Dengie and across Essex.
- Location
- Dengie (CM0)
- County
- Essex
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Dengie
More services for Dengie
Work for landlords and builders
We work for landlords, letting agents and housing providers in Dengie as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
For anyone letting property in or around Dengie, we will quote for several properties at once. Just send photos for each address and we will price them together.
How the visit works
Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
Get a quote
If you’re in Dengie and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
When a repair isn’t the answer
A repair isn’t always the answer, and we’ll tell you before we start. We can’t fix:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
How to look after the repair
To keep it looking its best:
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Wash away dyes and oils after use
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
When to call us in Dengie
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Typical reasons for a call-out include:
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- Staining under the taps and around the waste
Before booking anyone
- If travel is included in the price
- Who turns up on the day
- What the guarantee covers, and for how long
- Whether they match the colour on site
FAQs for Dengie
Can you do the outside of a roll-top?
Yes. Inside and out.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you cover Dengie?
Yes. We work across the UK and come to Dengie. Send pictures and we’ll quote, or call 0345 017 0787.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What affects the price in Dengie
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- How many areas need work
- Access to the area
- Whether old repairs or coatings need taking off
- The material and finish
We charge the same wherever you are, with no extra for Dengie. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
You can normally get a fixed price without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- One sharp close-up of the damage
- One picture of the entire bath
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- No need to remove anything
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- We leave the room as we found it
Take a look at our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
