Highland · Scotland

Bath Resealing in Fearn

Fixed-price bath resealing in Fearn and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Black mould in the sealant
  • Discoloured, yellow sealant
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Fearn?

About our bath resealing in Fearn

A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. Our repair technicians work on basins & vanity units, baths and kitchen worktops & sinks, and common reasons people contact us are sealant that’s split or lifting and leaks at the edges.

Big or small, it’s backed by a one-year guarantee in Fearn and across Highland.

Area
Fearn (IV20)
County
Highland
Warranty
One year on every repair
Quotes
Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How to look after the repair

After the repair has cured, a few habits help it last:

  • Clean the sealant gently and regularly
  • Don’t stand toiletries on the seal
  • Dry the seal after bathing
  • Open a window after bathing

Good ventilation is the best protection, and wipe the joints after use.

Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Landlord and trade work in Fearn

If you manage property in Fearn, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

What happens on the day

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow around two hours. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. We dry the joint thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Getting ready for the visit

  • Let us know about parking or access
  • Point us to the nearest place to park
  • Let us know which floor the room is on

Get a quote

To get a price, send a couple of pictures through our quote form or call us. We will say straight away whether it can be repaired.

Send pictures for a quote

Related advice

What a repair cannot fix

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Gaps so wide they need filling or trims before sealing
  • Loose tiles, which need refixing first
  • A flexing bath

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures
  • Baths
  • Wet rooms

Common questions in Fearn

Do you charge for travel?

There is no separate call-out charge. The fixed price covers the visit and the work.

How long before I can shower?

Normally about a day later. We will tell you the exact time.

How long does resealing take?

Generally a couple of hours, plus curing time.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll tell you when the room can be used again.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Why reseal now?

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.

Why Fearn customers choose us

  • Every repair guaranteed for a year
  • Rooms protected and left tidy
  • CHAS, Constructionline and SafeContractor accredited
  • We come to you, anywhere in the UK

See our prices page.

Different materials, different repairs

Shower trays

We put weight on a tray before sealing it, for the same reason.

Baths

We fill the bath before sealing, to open the joint fully.

Do you need bath resealing in Fearn?

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.

Send us a picture if you notice any of these:

  • Gaps by the taps
  • Damp near the bath
  • A messy previous reseal
  • Discoloured, yellow sealant

What to look for in a quote

  • What prep work is covered
  • Whether there are any call-out or travel charges
  • How to care for the finish
  • What protection goes down before work starts

10 questions to ask before you book

Covering Fearn

Fearn is about 13 miles north of Nairn, in Highland. We visit homes and businesses in Fearn and nearby villages, so nothing has to leave your home. We work in all 253 towns and villages in Highland, from the larger towns to small villages.

Every address in IV20 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Hill of Fearn (1 mile north-west), Loans of Tullich (1 mile south-east), Balintore (2 miles south-east), Shandwick (2 miles south-east) and Arabella (2 miles south-west). We also work in nearby towns such as Nairn (13 miles south), Tain (5 miles north-west), Alness (12 miles south-west), Dornoch (8 miles north), Invergordon (10 miles south-west) and Fortrose (15 miles south-west). Some remote addresses need extra planning, so it’s best to call first.

Around Fearn

Typical jobs here are in homes near Fearn. The closest station to Fearn is Fearn station, about 1.5 miles west. A little further out are Milntown Castle (4.7 miles south-west). The countryside around Fearn includes Loch Eye.

Map of Fearn © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.