Hertfordshire · England
Bath Resealing for Felden homes
Bath resealing for Felden, without a refit. Get a fixed quote from your photos, then book a visit.
- Black mould in the sealant
- Sealant that’s split or lifting
- Water getting behind the bath or tray
What we’re called out for in Felden
In time, even good sealant discolours. Steam, soap and movement all take their toll.
The things customers typically mention when they call are:
- Damp near the bath
- Old sealant that looks dirty
- Black mould in the sealant
- Silicone smeared on tiles
Questions to ask before booking
- Whether they match the colour on site
- What prep work is covered
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
About our bath resealing in Felden
Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, then it needs to cure. We are frequently asked to fix black spots in the silicone and a messy previous reseal, across wet rooms, shower trays & enclosures and basins & vanity units.
Every repair is covered by a one-year guarantee.
- Where
- Felden (HP3, WD4)
- Region
- Hertfordshire
- Guarantee
- One year on every repair
- Price
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Felden
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Why it’s worth resealing in Felden
A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Felden
- Technicians who travel to you, UK-wide
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
Read our pricing.
What else we do in Felden
FAQs for Felden
How long does silicone take to cure?
You will get the curing time from us, generally around a day.
Can new silicone go over old?
We always remove the old sealant completely. New silicone won’t bond to old.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Why does my sealant keep going mouldy?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
Where we work around Felden
Felden is about 2 miles south of Hemel Hempstead, in Hertfordshire. Jobs in Felden are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Felden is one of 381 towns and villages in Hertfordshire we cover. Our nearest city page is London, about 22 miles away.
Every address in HP3 and WD4 is covered. Local streets include Pond Road, Rose Lane and Lower Road, and we cover them all. Neighbouring places we cover include Nash Mills (1 mile east), Rucklers Lane (1 mile south), Apsley (1 mile north-west), Bennetts End (1 mile north-east) and Kings Langley (1 mile south-east). Larger places within reach include Watford (5 miles south-east), St Albans (6 miles east), Welwyn Garden City (12 miles east), Harpenden (8 miles north-east), Hatfield (10 miles east) and Borehamwood (9 miles south-east).
Around Felden
We visit homes around The Paper Mill pub, Nash Mills Church of England Primary School and Kings Langley School, among other places. There’s a railway station in Felden itself: Apsley station. Further afield, we also cover the area around Hemel Hempstead Hospital (1.5 miles north). Not far away are Long Deans and Verulamium Lake.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Baths
Baths are resealed with water in them, so the joint is at its widest.
Prices and what affects them
You will not pay by the hour. The price is based on:
- The size and number of damaged areas
- Unusual colours or finishes
- What kind of damage it is
- The material and finish
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
You can generally get a fixed price without us visiting. To help us price it:
- Natural light rather than flash
- A picture taken from further back
- The material, if you know it
- Something in shot to show the size
If you are in Felden and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Rotten walls or floors behind the bath
- A flexing bath
- Loose tiles, which need refixing first
Send us pictures and we will tell you honestly before you book.
What we work on
- Wet rooms
- Kitchen worktops & sinks
- Baths
- Basins & vanity units
- Shower trays & enclosures
How the visit works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a couple of hours, and we finish by cleaning up and talking you through the result.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Getting ready for the visit
- Let the surface dry out before the visit
- Clear the area around the damage
- Have a window or extractor fan available
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
