Nottinghamshire · England
Bath Resealing for Flawborough homes
Our repair technicians come to Flawborough for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.
- Gaps in the seal
- Silicone smeared on tiles
- Black mould in the sealant
About our bath resealing in Flawborough
The key to a good reseal is getting all of the old silicone out. New silicone will not bond to old, which is why so many DIY reseals peel. Common call-outs are for damp near the bath and silicone coming away from the tiles, in wet rooms, kitchen worktops & sinks and baths.
We stand behind the work with a one-year guarantee.
- Area
- Flawborough (NG13)
- Area hub
- Nottinghamshire
- Guarantee
- 12 months on all our work
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Work for landlords and builders
If you manage property in Flawborough, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
What we cannot put right
A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:
- Movement in the bath or tray
- Hidden water damage
- Gaps too big for silicone alone
Not sure? Send photos and we will give you a straight answer.
What we work on
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Run the extractor fan during and after showers
- Reseal at the first sign of lifting
- Air the room after use
- Clean the sealant gently and regularly
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Black mould in sealant is not just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.
Why reseal now?
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- A year’s guarantee on all work
Read our full price list.
Covering Flawborough
Flawborough is about 7 miles south of Newark-on-Trent, in Nottinghamshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Flawborough is one of 329 places in Nottinghamshire we cover. We work right across the region, from Flawborough to Birmingham (about 57 miles away).
Every address in NG13 is covered, from the main roads to the quietest streets. Other places close to Flawborough include Kilvington (1 mile east), Staunton in the Vale (1 mile east), Orston (2 miles south-west), Hawksworth (2 miles west) and Bottesford (3 miles south-east). We also work in nearby towns such as Carlton (11 miles west), Newark-on-Trent (7 miles north), West Bridgford (13 miles west), Netherfield (10 miles west), Bingham (6 miles west) and Radcliffe on Trent (9 miles west).
Around Flawborough
In Flawborough, that means homes near Church of St Peter. For rail, the closest station is Elton & Orston station, about 2 miles south-west. Other landmarks nearby include Flintham Museum (3.3 miles north-west).
Towns and villages near Flawborough
What else we do in Flawborough
What bath resealing costs
You’ll know the full cost before booking. We take into account:
- Access to the area
- Doing more than one item at once
- How hard the colour is to match
- The size and number of damaged areas
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- Daylight if possible, and no flash reflection
- Any details about the material
- Your postcode, so we can check dates
- One picture of the whole bath or shower
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, for the same reason.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Questions from Flawborough
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Do you come to Flawborough?
Yes. We cover the entire UK and come to Flawborough. Send photos and we will quote, or call 0345 017 0787.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can you quote from photos?
Nearly always. If photos do not show enough, we will ask for another angle.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take around two hours.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Let the surface dry out before the visit
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
