Dorset · England

Bath & shower resealing (mastic) in Fleet, Dorset

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Fleet and across Dorset. Free, fixed quotes from your photos.

  • An untidy old seal
  • Missing sealant behind the taps
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Fleet

About our bath resealing in Fleet

We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours. We work on basins & vanity units, wet rooms and shower trays & enclosures, and the jobs we see most are black mould in the sealant and a messy previous reseal.

You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.

Technician in a mask working on a freestanding roll-top bath
Location
Fleet (DT3)
Area hub
Dorset
Warranty
A year, on every repair
Quote
Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

What we can’t put right

A repair isn’t always the answer, and we would rather say so up front. We can’t fix:

  • A flexing bath
  • Very wide gaps that need a trim
  • Water damage behind the bath that needs a builder

If in doubt, send pictures and we will say what we think before booking.

What we work on

  • Baths
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Wet rooms

Landlords, agents and businesses in Fleet

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Do you need bath resealing in Fleet?

Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint flexes each time the bath fills.

Signs it’s time to call us include:

  • Damp near the bath
  • A messy previous reseal
  • Mould you cannot clean out
  • Stained silicone

Before booking anyone

  • The length of the guarantee and what it covers
  • What happens if they find more damage
  • How to care for the finish
  • How long it needs to cure

How to compare quotes

Covering Fleet

Fleet is about 3 miles west of Weymouth, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Fleet is one of 462 towns and villages in Dorset we cover.

All of DT3 is within our area. Streets in the area include Fleet Road and Butter Street, and we cover them all. If you’re just outside Fleet, we cover Langton Herring (1 mile north-west), West Shilvinghampton (2 miles north), Rodden (2 miles north-west), Waddon (3 miles north) and Friar Waddon (3 miles north). Within a short drive, we also cover Weymouth (3 miles east), Dorchester (7 miles north-east), Bridport (13 miles north-west), Portland (6 miles south-east), Rodwell (3 miles east) and Fordington (7 miles north-east).

What’s near Fleet

Our customers here include homes close to Chickerell Primary Academy, Budmouth College and Parish Church of the Holy Trinity and the streets around them. The closest station to Fleet is Upwey station, roughly 3 miles north-east. Nearby you’ll also find Wyke Castle (2.9 miles south-east) and Weymouth Timewalk Museum (1.9 miles south-east). Open spaces near Fleet include Jordan Hill and Radipole Lake.

Map of Fleet © OpenStreetMap contributors

What we do, step by step

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes around two hours. We tidy up before we leave and tell you when it’s ready to use.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Clear toiletries, mats and anything else from around the area
  • Keep pets and children out of the room while we work

Get a quote

Email us a photo of the damage and one of the entire item, with your DT3 postcode, and we will come back with a fixed quote.

Send photos for a quote

Read more

What bath resealing costs

You won’t pay by the hour. The price depends on:

  • Unusual colours or finishes
  • The size and number of damaged areas
  • Whether we combine several jobs
  • What kind of damage it is

The price reflects the work involved, not where you live. You’ll see the full price before booking.

Quotes from your photos

Good photos mean an accurate price. Here’s what we find most useful:

  • The postcode, so we can plan the visit
  • The material, if you know it
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size

There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Fleet: your questions answered

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Will the price change on the day?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

How do I book?

Use the quote form or ring 0345 017 0787, and we will take it from there.

How long will it take?

Most reseals take about two hours. It then needs time to cure.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Are there extra charges for Fleet?

There is no separate call-out charge. The fixed quote covers the visit and the work.

What does bath resealing cost?

Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item with your DT3 postcode.

Can new silicone go over old?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Reseal at the first sign of lifting
  • Don’t stand toiletries on the seal
  • Air the room after use
  • Give the seal a regular clean

Leave the sealant to cure for the time we give you, normally about a day.

Black mould in sealant isn’t just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.

Is resealing worth it?

Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • Work done at your home or business
  • Free fixed quotes from pictures
  • One visit for most repairs
  • Dust sheets down, tidy finish

Read our pricing.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.